Kennametal 6086560 Square End Mill 7/64 in 4 Flute Tialn

Product Description

The KENNAMETAL 6086560 is a solid carbide square end mill designed for precision milling in demanding metalworking applications. It features a 7/64 inch (0.1094 inch) cutting diameter, a 3/8 inch length of cut, and a 1/8 inch shank diameter with an overall length of 1.5 inches. The four-flute, spiral geometry with a 30-degree helix angle promotes efficient chip evacuation and smooth cutting action. A TiAlN coating from the KC633M material grade provides thermal resistance and extended tool life when cutting ferrous materials. This is a single-end, right-hand cut, right-hand flute configuration with centercutting capability, making it suitable for both plunging and profiling operations.

This end mill is built for milling steel, stainless steel, and cast iron in production and maintenance environments. The centercutting design allows direct plunge entry without a pre-drilled hole, adding flexibility in setup. The TiAlN finish handles elevated cutting temperatures common in high-speed steel and stainless steel applications. Machinists and toolroom operators working on CNC machining centers, vertical mills, and manual knee mills will find this tool well suited to slot milling, profiling, and pocketing operations where tight dimensional control is required.

Key Features

• Solid carbide construction from the KC633M material grade for rigidity and wear resistance
• TiAlN coating for thermal protection and extended tool life in steel and stainless steel
• Four spiral flutes with a 30-degree helix angle for efficient chip removal
• Centercutting design allows direct plunge milling without pilot hole
• Right-hand cut and right-hand flute orientation for standard spindle operation
• Single-end configuration with 3/8 inch length of cut and 1/8 inch shank

Compatibility

Rated for primary use in steel, stainless steel, and cast iron workpieces (material codes P, M, K). Fits standard 1/8 inch collets and tool holders on CNC machining centers and manual mills. Part of the KENNAMETAL 4SE.IS-R-L-X series.

Installation Notes

Installation should be performed by a qualified machinist or toolroom technician. Ensure the spindle is fully stopped and the machine is in a safe, locked-out state before changing tooling. Seat the 1/8 inch shank fully and evenly in the collet or tool holder before tightening to the holder manufacturer's specification. Inspect the cutting edges for chips or damage before each use, as carbide end mills are brittle and should not be dropped or struck against hard surfaces.