Kennametal 5824347 Corner Chamfer End Mill 1/4in 4 Flute

Product Description

The KENNAMETAL 5824347 is a solid carbide corner chamfer end mill designed for high-performance milling in demanding shop environments. Built on the 4CH series platform, it carries a 1/4 inch diameter, 1/2 inch length of cut, and a 0.0160 inch chamfer width at a 45-degree chamfer angle. The TiN/TiAlN PVD coating under material grade KC633M provides thermal and wear resistance suited to aggressive cutting cycles. With four right-hand helical flutes at a medium helix pitch and centercutting capability, this tool handles a wide range of milling operations. Machinists and tool-and-die professionals install and run this end mill on CNC vertical and horizontal machining centers.

This end mill is suited for operations on steel, stainless steel, cast iron, and non-ferrous metals. Approved operations include shouldering, slotting, ramp-down entry, helical interpolation, drill-milling, and plunging and recessing. The single-end, straight-cylindrical shank with a 1/4 inch shank diameter seats into standard ER or set-screw toolholders. The 2 inch overall length and regular length-type classification make it a practical fit for general-purpose machining cells running both roughing and finishing passes in the same setup.

Key Features

• Solid carbide construction with TiN/TiAlN PVD coating (KC633M grade) for extended tool life in ferrous and non-ferrous materials
• 45-degree chamfer angle with 0.0160 inch chamfer width for consistent edge-break geometry
• Four right-hand helical flutes with medium helix and normal pitch for balanced chip evacuation
• Centercutting design enables plunging, drill-milling, and helical interpolation without pilot drilling
• Compatible with shouldering, slotting, ramp-down, and recessing operations in a single tool
• Straight-cylindrical shank fits standard ER collets and set-screw toolholders

Compatibility

Designed for use on steel, stainless steel, cast iron, and non-ferrous metals. Manufacturer catalog number 4CH0250IS050A. No specific machine model compatibility was stated in the product data.

Installation Notes

Installation and operation should be performed by a qualified machinist or CNC setup technician. Ensure the machine spindle is fully stopped and the tool changer is in a safe state before loading or removing the end mill. Seat the shank fully into the toolholder and torque the collet nut or set screw to the toolholder manufacturer specification. Verify runout with a dial indicator before initiating a cut, as excessive runout accelerates carbide wear and affects chamfer accuracy.