Kennametal 5824223 Corner Chamfer End Mill 4mm 4 Flute

Product Description

The KENNAMETAL 5824223 is a solid carbide corner chamfer end mill designed for precision milling operations in metalworking applications. Built on the KC633M material grade with a TiAlN PVD coating, this single-end tool runs a 4 mm diameter with a 19 mm length of cut and a 4 mm straight-cylindrical shank. The 0.1 mm chamfer width at a 45-degree angle produces clean, controlled edge breaks on finished surfaces. Four right-hand helical flutes at a 30-degree helix angle support efficient chip evacuation across roughing and finishing passes. Centercutting geometry allows direct plunging without a pilot hole.

This end mill is suited for use in CNC machining centers handling steel, stainless steel, cast iron, and non-ferrous metals. Its toolpath versatility covers shouldering, slotting, rampdown, helical interpolation, drill milling, and plunging and recessing operations. The 63 mm overall length fits standard tool holders used in both vertical and horizontal machining setups. The KC633M series 4CH designation makes this a catalog-referenced option for shops requiring consistent geometry across repeat jobs.

Key Features

• 4 mm diameter solid carbide construction with TiAlN PVD coating for extended tool life in ferrous materials
• 0.1 mm chamfer width at 45-degree chamfer angle for precise edge conditioning
• Four right-hand helical flutes at 30-degree helix angle for balanced cutting performance
• Centercutting design supports direct plunge entry without pre-drilling
• Compatible with shouldering, slotting, helical interpolation, rampdown, and drill mill operations
• Straight-cylindrical shank with tight tolerance range of +0.000 to -0.008 mm for secure tool holder engagement

Compatibility

Primary workpiece materials include steel, stainless steel, cast iron, and non-ferrous metals (material codes P, M, K, N). Also referenced by catalog number 4CH0400ML019A.

Installation Notes

Installation and operation of this tool should be performed by qualified machinists or CNC tooling technicians. Verify spindle speed, feed rate, and depth of cut parameters against the machine tool specifications before running. Ensure the tool holder is clean and properly torqued before spindle engagement. Do not exceed the rated length of cut or use this tool in interrupted cuts that exceed the rigidity of the setup.