Kennametal 5824218 Square End Mill 0.0787 in 4 Flute Carbide

Product Description

The KENNAMETAL 5824218 is a solid carbide square end mill designed for precision milling operations in metalworking and machining applications. With a 0.0787-inch (2.00 mm) mill diameter and a 0.248-inch (6.30 mm) length of cut, this tool is built for fine-detail work where tight tolerances are required. The TiAlN coating provides thermal resistance and wear protection, extending tool life in ferrous and hardened materials. Four spiral flutes with a 30-degree helix angle promote efficient chip evacuation and smooth cutting action. This end mill is center-cutting, allowing direct plunge entry into the workpiece.

This end mill is suited for precision machining in tool and die, mold making, aerospace component work, and general CNC milling where small-diameter finishing or slotting is required. The right-hand cut and right-hand flute configuration is standard for conventional CNC vertical machining centers and manual mills. The 3.00 mm shank diameter and 38.00 mm overall length make it compatible with standard small-diameter collet systems. Machinists and CNC operators working with close-tolerance features in hard materials will find this tool appropriate for finish passes and light roughing.

Key Features

• 0.0787-inch (2.00 mm) diameter for fine-detail and small-feature milling
• TiAlN finish for elevated heat resistance and extended tool life in ferrous materials
• 4-flute spiral design with 30-degree helix angle for efficient chip evacuation
• Center-cutting capable — supports direct plunge milling
• Right-hand cut, right-hand flute — standard orientation for CNC machining centers
• Solid carbide construction for rigidity and wear resistance

Compatibility

Designed as an OEM-style replacement or standard tooling selection for CNC machining centers and manual mills using collet systems sized for 3.00 mm shank diameters.

Installation Notes

Installation should be performed by a qualified machinist or CNC operator. Ensure the spindle is fully stopped and the machine is powered down before changing tooling. Secure the shank in a properly sized collet or end mill holder, torquing to the machine manufacturer's specification. Verify runout with an indicator before beginning cuts, as small-diameter carbide end mills are sensitive to setup error and can fracture under lateral load if not properly seated.