Kennametal 5667404 Indexable Copy Face Mill 2 in 4 Insert

Product Description

The KENNAMETAL 5667404 is an indexable copy face mill designed for high-efficiency milling operations in metalworking and machining applications. Built around the Series 7792 platform with cutter style C7792VXD12-A2.00Z04R, this tool accepts four XD 12 inserts and delivers a maximum depth of cut of 0.098 inches per pass. The 2.0-inch cutting diameter and 0.750-inch arbor hole diameter make it a well-proportioned tool for medium-duty face milling work. Through-coolant capability is integrated directly into the body, helping extend insert life and maintain dimensional accuracy during continuous cutting. Machining professionals and toolroom technicians install and run this type of cutter on vertical machining centers and milling machines.

This copy face mill is suited for copy milling and contour face milling operations on ferrous and non-ferrous workpieces. The four-insert configuration provides a balanced chip load across the cutter face, making it appropriate for both roughing and semi-finishing passes on machining centers. Its compact overall height of 1.574 inches keeps the tool profile low for setups with limited Z-axis clearance. Through-coolant delivery directs fluid precisely at the cutting zone, which is particularly valuable in deep-pocket or high-feed applications where heat buildup is a concern.

Key Features

• Accepts four XD 12 indexable inserts for consistent cutting geometry and easy insert replacement
• Maximum depth of cut of 0.098 inches for controlled, accurate passes
• Through-coolant design extends insert life and improves chip evacuation
• 2.0-inch cutting diameter and 0.750-inch arbor hole diameter for standard machine spindle mounting
• Series 7792 platform with cutter style C7792VXD12-A2.00Z04R for confirmed insert and toolholder compatibility
• Low-profile overall height of 1.574 inches reduces interference in confined setups

Compatibility

Designed for use with XD 12 series indexable inserts. The cutter style designation C7792VXD12-A2.00Z04R identifies the specific insert pocket geometry and arbor interface. Verify insert grade and geometry selection against the workpiece material and cutting parameters before use.

Installation Notes

Installation is performed by qualified machinists or toolroom technicians on milling machines or machining centers equipped with the appropriate arbor interface. Power down and lock out the spindle drive before mounting or removing the cutter. Use the correct torque procedure for insert clamping screws as specified by the insert manufacturer documentation. Confirm runout and axial seating after mounting before commencing a cut.