Kennametal 5327942 VPGR332FP KCP10 Turning Insert

Product Description

The KENNAMETAL 5327942 is a solid carbide turning insert in the VPGR332FP geometry with KCP10 grade designation. It features a multilayer CVD coating of TiCN and Al2O3 applied via MTCVD process, delivering high wear resistance on steel and moderate wear resistance with toughness on aluminum and non-ferrous materials. The insert has a 35-degree diamond (rhombic) shape, positive rake angle of 15 degrees, positive side clearance, and an FP chip breaker optimized for finishing operations. Cutting edge style is honed. This insert is part of the KENNAMETAL Top Notch series and is held in place by a clamp-style insert holding method. It is designed for use by machinists and CNC turning specialists in production and job-shop environments.

This insert is suited for turning, facing, boring, back turning, and back boring operations on steel as the primary workpiece material, with secondary application on aluminum and non-ferrous materials. The FP chip breaker geometry targets finishing passes requiring tight surface finish control and consistent chip evacuation. The maximum depth of cut is 0.0600 inches (1.52 mm), making it appropriate for light finishing cuts rather than heavy roughing. It carries both ANSI and ISO standards compliance, with ANSI insert code VPGR332 and ISO insert code VPGR160408.

Key Features

• KCP10 grade with multilayer CVD TiCN and Al2O3 coating for extended tool life on steel
• 35-degree diamond (rhombic) insert shape with positive rake and positive side clearance
• FP chip breaker geometry designed for finishing operations
• Honed cutting edge for consistent edge integrity on light finishing passes
• Two cutting edges per insert; neutral hand orientation
• Multi-use capability: turning, facing, boring, back turning, and back boring

Compatibility

Designed as an OEM-specified replacement and standard insert for KENNAMETAL Top Notch clamp-style turning toolholders accepting VPGR-geometry inserts per ANSI and ISO standards. Material grade classification C3 and C7.

Installation Notes

Installation is performed by qualified machinists or CNC tooling technicians. Power down and lock out the machine spindle before indexing or replacing inserts. Use the appropriate torque wrench and clamp screw specified by the toolholder manufacturer when seating the insert — do not overtighten by hand. Verify insert seating and clamp engagement before resuming cutting operations.