Kennametal 1832360 VNMG331MP KC5010 Turning Insert

Product Description

The KENNAMETAL 1832360 is a VNMG331MP-style solid carbide turning insert coated with TiAlN via a PVD process and manufactured under the KC5010 grade. It features a 35-degree diamond shape, a neutral hand orientation, and a chamfered-and-honed cutting edge for controlled engagement. The insert carries a 3/8-inch inscribed circle, a 3/16-inch thickness, and a 1/64-inch corner radius, making it well suited for finishing and semi-finishing operations where edge integrity and coating adhesion are critical. Four cutting edges are available per insert, improving cost-per-edge economics on production runs. This insert belongs to the KENLOC series and conforms to ANSI and ISO standards.

This insert is designed for turning, facing, boring, back turning, and back boring operations on steel, stainless steel, superalloys, and titanium workpieces. The KC5010 PVD-TiAlN coating delivers strong adhesion and thermal resistance at the cutting zone, supporting consistent performance across primary workpiece material codes P, M, and S. The MP chip breaker geometry manages chip flow effectively at moderate depths of cut up to 0.05 inches (1.25 mm), making this insert a practical choice for CNC turning centers running these material families in both production and job-shop environments.

Key Features

• KC5010 grade with PVD TiAlN coating for thermal resistance and adhesion on difficult alloys
• MP chip breaker geometry optimized for turning, facing, boring, and back-boring applications
• Four cutting edges per insert reduces tooling cost per edge
• Chamfered and honed cutting edge style provides controlled entry and extended edge life
• Negative rake angle with 0-degree relief (clearance code N) suits rigid clamping setups
• Conforms to ANSI and ISO insert standards for broad toolholder compatibility

Compatibility

Designed for use in KENLOC-series toolholders accepting VNMG-style inserts with a 3/8-inch inscribed circle and pin-and-clamp holding method. Compatible with toolholders conforming to ANSI and ISO VNMG insert seating standards. Primary workpiece material codes P (steel), M (stainless steel), and S (superalloys and titanium) are supported; secondary workpiece material codes N, P, and S apply.

Installation Notes

Installation is performed by a qualified machinist or tooling technician. Ensure the machine spindle is fully stopped and the turret is indexed to a safe position before changing inserts. Seat the insert fully against the pocket locating surfaces and secure with the clamp and pin as required by the KENLOC toolholder design. Inspect the insert pocket for chips or damage before seating a new edge, as debris under the insert will affect edge height and part tolerance.