Kennametal 1817867 Indexable Face Mill 50.04mm Kssm

Product Description

The KENNAMETAL 1817867 is a 45-degree chamfer-angle indexable face mill designed for milling operations requiring controlled chamfering and face finishing. Built on the KSSM series platform, this right-hand cutter accepts four SEKT 1404 inserts secured by screw-style insert retention. The cutter spans a cutting diameter range of 1.97 to 2.515 inches (50.04mm nominal) with a maximum depth of cut of 6.6mm (0.26 inches). Rated to 22,500 RPM at medium pitch, it is suited for high-speed face milling on CNC machining centers. Machinists and tooling specialists install this cutter in production and job-shop environments where repeatable chamfer geometry and insert indexability are required.

This face mill is applied in ferrous and non-ferrous machining operations on vertical and horizontal CNC mills. The 3/4 inch arbor hole with a 0.33 inch keyway width allows direct mounting to standard arbor toolholders. With four flutes and medium pitch spacing, the 1817867 is suited for general-purpose face milling at moderate to high feed rates. It is used in aerospace, automotive, and general metalworking applications where a consistent 45-degree chamfer profile and repeatable surface finish are required.

Key Features

• 45-degree chamfer angle for controlled edge preparation and face milling in a single pass
• Accepts 4 SEKT 1404 inserts with screw-style clamping for secure, repeatable indexing
• Cutting diameter range: 1.97 to 2.515 inches with 6.6mm maximum depth of cut
• Rated to 22,500 RPM with medium pitch insert layout
• Right-hand cut, 4-flute configuration on the KSSM series platform
• 3/4 inch arbor hole with keyway for positive drive and accurate runout

Compatibility

Designed for use with SEKT 1404 series inserts and compatible with standard 3/4 inch arbor toolholding systems on CNC vertical and horizontal machining centers running the KSSM cutter style KSSISR configuration.

Installation Notes

Installation should be performed by a qualified machinist or tooling technician. Power down and lock out the spindle before mounting or indexing inserts. Seat the cutter body fully on the arbor and torque the arbor retention hardware per the machine manufacturer specification. Inspect insert seating and screw torque before first cut; loose inserts at high RPM present a serious safety hazard.