Kennametal 1586645 Milling Insert ANGT1606PPFRLGJ KC510M

Product Description

The KENNAMETAL 1586645 is a solid carbide milling insert with ISO designation ANGT1606PPFRLGJ, manufactured in the KC510M grade with a PVD-applied TiAlN coating. This parallelogram-shaped insert features an 85-degree included angle, a right-hand cutting orientation, and a 30-degree rake angle. At 0.433 inches wide and 0.250 inches thick, it is designed for use in screw-clamped milling toolholders across a range of material applications. The LG chip breaker geometry promotes controlled chip evacuation during aggressive face and shoulder milling operations. Licensed machinists and CNC tooling technicians typically specify this insert for production milling cells.

This insert is suited for milling steel, cast iron, non-ferrous metals, and hard materials, making it a versatile choice across both roughing and finishing passes depending on feed and depth-of-cut parameters. The KC510M grade is optimized for applications where thermal and abrasive wear resistance are required. The ANGT series geometry and right-hand designation make it a direct fit in compatible ANGT-style toolholders used in horizontal and vertical milling centers in both job shop and production environments.

Key Features

• Solid carbide substrate with PVD TiAlN coating for extended tool life in abrasive and high-heat applications
• KC510M manufacturer grade engineered for steel, cast iron, non-ferrous, and hard material milling
• LG chip breaker geometry for reliable chip control across varied feed rates
• Right-hand cutting orientation with 30-degree rake angle for efficient shear action
• Screw-clamped insert holding method for secure, repeatable seating in the toolholder pocket
• ISO code ANGT1606PPFRLGJ provides direct cross-reference for toolholder and catalog matching

Compatibility

Designed for use in ANGT-series screw-clamp milling toolholders accepting inserts with an ANGT1606 pocket designation. Compatible with applications across primary workpiece material codes P (Steel), K (Cast Iron), N (Non-Ferrous Metal), and H (Hard Material).

Installation Notes

Installation should be performed by a qualified machinist or CNC tooling technician with the machine spindle fully stopped and locked out per facility lockout/tagout procedures. Seat the insert fully into the pocket before engaging the clamping screw, and verify the cutting edge is correctly oriented for right-hand rotation before resuming operation. Do not mix insert grades or geometries within the same toolholder pocket. Inspect the pocket and clamping screw for wear or debris before each insert change.