Kennametal 1094513 Indexable Turning Toolholder Rh

Product Description

The KENNAMETAL 1094513 is a right-hand SCRC-style indexable turning toolholder designed for external turning operations on CNC lathes and manual turning centers. It features a neutral rake geometry with a 0-degree rake angle and a 15-degree lead angle, making it well suited for general-purpose turning where cutting forces need to be balanced across the insert. The toolholder uses a screw-on clamping method to secure the insert, providing reliable repeatable positioning. The shank measures 0.625 inches wide by 0.630 inches tall with an overall length of 4 inches. This toolholder is installed by machinists and CNC operators in production and job-shop environments.

This toolholder is intended for use in external turning applications on lathes and turning centers in both production and maintenance machining environments. It accepts CC..32.5. series inserts with a 3/8-inch (0.375-inch) inscribed circle, which are common in general turning work across a range of materials. The screw-on holding method keeps setup time low and allows fast insert indexing. The 15-degree lead angle promotes smooth entry into the cut and helps manage chip flow. This toolholder is part of the SCRC screw-on series and carries Kennametal catalog number SCRCR103.

Key Features

• Right-hand SCRC-style toolholder for external turning operations
• Neutral rake geometry with 0-degree rake angle for balanced cutting forces
• 15-degree lead angle for smooth cut entry and chip management
• Screw-on insert clamping for fast, repeatable insert indexing
• Accepts CC..32.5. inserts with 0.375-inch inscribed circle
• Steel construction for rigidity and durability in production environments

Compatibility

Designed to accept CC..32.5. series indexable inserts (complete insert compatibility: CC.. 3252) with a 3/8-inch inscribed circle. Verify insert geometry and clamping style against your turning center specifications before ordering.

Installation Notes

Installation is performed by a qualified machinist or CNC operator. Ensure the lathe or turning center is powered down and the spindle is fully stopped before changing toolholders or indexing inserts. Use the appropriate Torx or hex key as specified for the screw-on clamping screw, and verify that the insert is fully seated before resuming cuts. Follow your machine tool manufacturer guidelines for tool stick-out and shank clamping torque.