Jmf Company 2529516169800 Wrot Copper 45D Street Elbow

Product Description

The JMF COMPANY 2529516169800 is a wrot copper 45-degree short radius street elbow designed for use in refrigeration and plumbing systems. It features a male soldered (FTG) inlet and a female soldered (C) outlet, allowing it to connect directly into copper tubing runs without an additional coupling. Manufactured from C12200 copper to ASTM B75 material specifications, this fitting meets ASME/ANSI B16.22 and MSS SP-104 dimensional and performance standards. The short radius design keeps the fitting compact, making it well-suited for tight-clearance installations in mechanical rooms, equipment cabinets, and wall chases.

This elbow is rated for commercial, residential, and industrial applications across plumbing and refrigeration systems. The refrigeration-side nominal size is 1-1/8 inches outer diameter, while the water-side nominal size is 1 inch. Plumbers and HVAC-R technicians install this fitting wherever a 45-degree directional change is required in a sweat-soldered copper line. It is appropriate for use in both low-pressure domestic water lines and refrigerant piping circuits handled by EPA Section 608-certified technicians.

Key Features

• 45-degree short radius street configuration reduces overall installed length compared to standard elbows
• FTG x C end connection allows direct insertion into a fitting socket, eliminating one coupling
• C12200 copper construction per ASTM B75 provides corrosion resistance in both water and refrigerant service
• Wrot manufacturing process produces a dense, uniform grain structure suited for pressure-bearing applications
• Meets ASME/ANSI B16.22 and MSS SP-104 standards for dimensional consistency and pressure ratings
• Suitable for commercial, residential, and industrial plumbing and refrigeration service

Compatibility

Designed as an OEM-style wrot copper street elbow compatible with 1-1/8 inch OD refrigeration tubing and 1 inch nominal water copper tubing systems using sweat-soldered connections per ASME/ANSI B16.22.

Installation Notes

Installation should be performed by a licensed plumber or EPA Section 608-certified HVAC-R technician. Shut off system pressure and recover any refrigerant charge before cutting into refrigerant lines; isolate and drain water lines before cutting into plumbing circuits. Clean all mating surfaces with emery cloth and apply flux before soldering in accordance with applicable local mechanical codes and ASTM B813 flux standards. Do not apply excessive heat to the fitting during soldering, as overheating can compromise the copper grain structure.

Technical Specifications

• Fitting Type: Short Radius Street Elbow
• Angle: 45 degrees
• Refrigeration Size: 1-1/8 inches OD
• Water Size: 1 inch nominal
• End Connection: Male Soldered (FTG) x Female Soldered (C)
• Material: C12200 Copper
• Material Specification: ASTM B75
• Process: Wrot
• Applicable Standards: ASME/ANSI B16.22, MSS SP-104
• Application: Commercial, Residential, Industrial, Plumbing and Refrigeration

Standard Information

• Brand: JMF COMPANY
• Manufacturer Part Number: 2529516169800