Jmf Company 2510116169800 Copper Adapter 1 Inch Cxmpt

Product Description

The JMF COMPANY 2510116169800 is a wrot copper adapter fitting used to transition between a female solder (sweat) connection and a male pipe thread connection in copper piping systems. Sized at 1 inch on both ends, it is machined from C12200 phosphorus deoxidized copper meeting ASTM B75 material specification. The wrot construction means the fitting is formed from wrought copper stock, producing a dense, consistent grain structure suited for pressure-rated plumbing and refrigeration service. Licensed plumbers and refrigeration technicians install this fitting in both new construction and retrofit applications where a copper sweat line must terminate at a threaded connection point.

This adapter is rated for commercial, residential, and industrial plumbing systems as well as refrigeration piping. The female solder end accepts a 1-inch copper tube, while the male threaded end connects to a 1-inch female-threaded fitting, valve, or equipment port. With a refrigeration outer diameter of 1-1/8 inches on the sweat side, it is dimensionally correct for standard ACR and plumbing copper tube. It conforms to ASME/ANSI B16.22 and MSS SP-104, making it suitable for code-compliant installations in all three application classes.

Key Features

• Wrot C12200 copper construction meeting ASTM B75 material specification
• Female solder (sweat) x male pipe thread end connections in one fitting
• 1-inch Size A and 1-inch Size B for a straight, same-size transition
• Refrigeration OD of 1-1/8 inches on the sweat end, compatible with standard ACR copper tube
• Conforms to ASME/ANSI B16.22 and MSS SP-104 dimensional standards
• Approved for plumbing, HVAC, refrigeration, commercial, and industrial service

Compatibility

Designed as an OEM-style replacement or new-install copper adapter for residential, commercial, and industrial plumbing and refrigeration piping systems requiring a 1-inch female sweat to 1-inch male pipe thread transition.

Installation Notes

Installation is performed by a licensed plumber or refrigeration technician. Shut off the water or refrigerant supply and relieve system pressure before beginning work. The sweat end requires standard flux and lead-free solder per applicable local plumbing codes; the threaded end should be wrapped with PTFE tape or pipe thread sealant before makeup. Follow ASME and local code requirements for pressure testing after installation.