JBIND-CL4HD-60 Refrigerant Charging Evacuation Hose 6 Ft

Product Description

The JBINDUSTRIESJBINDCL4HD60 JBIND-CL4HD-60 is a single refrigerant charging and evacuation hose designed for use in HVAC service work. Built with a rubber and Kevlar construction, it is engineered to reduce refrigerant permeation during both charging and evacuation procedures. At 6 feet in length with a straight 0-degree angle fitting, it gives technicians comfortable reach when working on condensing units and air handlers. The black color coding helps with quick hose identification on the manifold gauge set. An anti-blowback valve is incorporated into the design to minimize refrigerant release when disconnecting from service ports.

This hose is intended for licensed HVAC and refrigeration technicians performing system charging, evacuation, and recovery on residential and light commercial refrigerant systems. The 6-foot length suits most standard service calls where the technician needs moderate slack between the manifold gauge set and the system service ports. The anti-blowback valve reduces refrigerant loss at disconnect, which is especially important for compliance with EPA Section 608 venting prohibitions.

Key Features

• Rubber and Kevlar construction reduces refrigerant permeation
• 6-foot length provides reach for most residential and light commercial service scenarios
• Straight 0-degree angle fittings for direct manifold and service port connections
• Anti-blowback valve minimizes refrigerant release at disconnect
• Black color for hose identification on manifold gauge sets

Compatibility

Designed as a replacement or additional hose for standard refrigerant manifold gauge sets used in HVAC and refrigeration service applications.

Installation Notes

Installation and use should be performed by a licensed HVAC or refrigeration technician holding an EPA Section 608 certification. Before connecting or disconnecting hoses, ensure the manifold gauge valves are closed to prevent uncontrolled refrigerant flow. Hand-tighten fittings first, then snug with an appropriate wrench — do not overtighten, as this can damage the valve cores or fitting seats. Inspect hose and fittings for wear or cracking before each use.

Technical Specifications

• Hose Length: 6 feet
• Fitting Angle: 0 degrees (straight)
• Hose Material: Rubber and Kevlar
• Color: Black
• Quantity: Single hose
• Valve Type: Anti-blowback

Standard Information

• Brand: JBINDUSTRIESJBINDCL4HD60
• Manufacturer Part Number: JBIND-CL4HD-60