Jaclo 629-62-PN Compression Valve Kit Polished Nickel

Product Description

The JACLO 629-62-PN is a 1/2-inch sweat by 3/8-inch OD compression valve kit finished in polished nickel. It is designed to serve as a supply stop valve between a water supply line and a fixture connection, controlling flow at the point of use. The sweat inlet connects directly to copper tubing using soldered joints, while the compression outlet connects to standard 3/8-inch OD supply tubing. This kit is suited for under-sink and fixture rough-in applications and is typically installed by licensed plumbers. The polished nickel finish provides corrosion resistance and a clean appearance in finished spaces.

This valve kit is used in residential and light commercial plumbing installations where a shutoff is needed at the fixture supply connection. Common applications include lavatory faucets, kitchen faucets, toilets, and similar fixtures fed by 3/8-inch OD supply lines. The sweat inlet is compatible with standard copper tubing rough-in. The kit is manufactured in the United States and finished in polished nickel to coordinate with matching fixture hardware.

Key Features

• 1/2-inch sweat (SWT) inlet for direct solder connection to copper supply pipe
• 3/8-inch OD compression outlet for standard fixture supply line connection
• Polished nickel finish for corrosion resistance and aesthetic coordination
• Nickel material construction for durability in wet environments
• Manufactured in the United States

Compatibility

Designed as a standard replacement or new-installation supply stop valve for residential and light commercial fixtures requiring a 1/2-inch sweat inlet and 3/8-inch OD compression outlet connection.

Installation Notes

Installation is performed by a licensed plumber. Shut off the main water supply and depressurize the line before soldering the sweat connection or making the compression fitting. Use appropriate flux and lead-free solder for the sweat joint in compliance with applicable plumbing codes such as the IPC. Do not overtighten the compression nut, as this can deform the ferrule and cause leaks.