Jackson Safety V8104306 Shock Absorbing Lanyard 6 Ft

Product Description

The JACKSON SAFETY V8104306 is a single-leg shock absorbing lanyard designed for fall protection in industrial and construction environments. Built with tear-pack webbing construction, this lanyard absorbs the energy of a fall by tearing internal webbing fibers in a controlled manner, reducing the force transmitted to the worker. It accommodates workers weighing between 130 and 310 pounds and extends to a working length of 6 feet. Licensed trades working at elevation rely on this type of lanyard as a core component of a compliant personal fall arrest system.

This lanyard is suited for use in general construction, industrial maintenance, and utility work where workers are exposed to fall hazards at height. The single-leg configuration is appropriate for straightforward anchor-point connections where dual-leg 100 percent tie-off is not required. It pairs with a full-body harness and a rated anchor point as part of a complete fall arrest system. Installers in the electrical, HVAC, and mechanical trades working on rooftop equipment or elevated platforms will find this a standard-issue component for OSHA-compliant fall protection programs.

Key Features

• Tear-pack webbing design dissipates fall energy through controlled internal tearing
• Single-leg configuration for direct anchor-point connection
• 6-foot working length suitable for standard overhead anchor applications
• Rated weight capacity of 130 to 310 pounds covers most working adults
• Compact lanyard design for use as part of a full personal fall arrest system

Compatibility

Designed for use with full-body harnesses and rated anchor points as part of a personal fall arrest system meeting applicable OSHA and ANSI fall protection standards.

Installation Notes

Installation and inspection of fall protection equipment should be performed by a competent person as defined under OSHA 29 CFR 1926 Subpart M. Inspect the lanyard for webbing damage, worn stitching, or deployed shock pack before each use — a deployed shock pack indicates the unit must be removed from service immediately and replaced. Connect only to a rated anchor point capable of supporting the required load. Do not modify, shorten, or tie knots in the lanyard webbing.

Technical Specifications

• Configuration: Single Leg
• Working Length: 6 feet
• Weight Capacity: 130 to 310 pounds
• Webbing Type: Tear Pack
• Unit of Measure: Each

Standard Information

• Brand: JACKSON SAFETY
• Manufacturer Part Number: V8104306