Ives SB45310B8TB Steel Surface Bolt 8 in Oil Rubbed Bronze

Product Description

The IVES SB45310B8TB is a steel surface bolt finished in oil rubbed bronze, designed for door security applications in residential and light commercial construction. Surface bolts are used to secure inactive door leafs on pairs of doors, French doors, and single doors where additional latching points are required. This bolt mounts directly to the door face and slides into a strike or floor socket to hold the door in position. At 1 pound and measuring 8.25 inches in length, it is sized for standard door applications and installs without specialized tooling. The oil rubbed bronze finish coordinates with matching door hardware on architectural projects.

The SB45310B8TB is suited for interior and exterior door installations where a surface-mounted manual bolt is required. Typical applications include inactive door leafs on double-door entry systems, utility and mechanical room doors, and residential entry doors requiring a secondary security point. The UL listing makes it appropriate for projects with code-specified hardware requirements. It is sold as an individual unit and is intended for installation by carpenters, finish hardware installers, or general contractors during door hardware trim-out.

Key Features

• Steel construction for durability in high-cycle door applications
• Oil rubbed bronze finish for coordination with architectural door hardware sets
• UL listed for use on projects with code-compliance requirements
• Surface-mount design requires no mortising or door prep beyond fastener holes
• 8-inch nominal bolt length suits standard residential and light commercial door widths

Compatibility

Designed as an OEM-style surface bolt for residential and light commercial door applications where a surface-mounted steel bolt in an oil rubbed bronze finish is specified.

Installation Notes

Surface bolts are typically installed by finish carpenters or hardware installers during door trim-out. Fasten the bolt body to the door face using the provided or specified fasteners, then mark and install the strike or socket at the header or floor accordingly. Verify door alignment before final fastener tightening to ensure smooth bolt operation. No electrical shutoff is required; installation should comply with applicable building codes and any project-specific hardware specifications.