Ives 69F10B Steel Hinge Pin Door Stop Oil Rubbed Bronze

Product Description

The IVES 69F10B is a hinge pin door stop finished in oil rubbed bronze, designed to limit door swing by installing directly onto the hinge pin of a standard door hinge. No wall or floor anchoring is required. The stop body is constructed of steel for reliable durability in everyday use. At 0.1 pounds and a compact footprint of 2.5 by 2.5 by 0.6 inches, it fits unobtrusively on the door hinge without interfering with door operation. This type of hardware is typically installed by finish carpenters, general contractors, or door and hardware specialists during new construction or renovation work.

The 69F10B is suited for residential and light commercial interior door applications where wall or floor stops are impractical or undesirable. The hinge pin mount style makes it a common choice for doors in tight corridors, finished rooms where baseboard or drywall protection is a concern, and retrofit installs where surface-mount stops are not an option. The oil rubbed bronze finish coordinates with matching architectural hardware on the same door.

Key Features

• Installs directly on the door hinge pin — no wall or floor penetration required
• Steel construction for long-term durability
• Oil rubbed bronze finish for coordination with architectural hardware sets
• Compact profile: 2.5 by 2.5 by 0.6 inches
• Lightweight at 0.1 pounds — does not add stress to hinge
• Sold individually (each)

Compatibility

Designed as a hinge pin door stop for standard residential and light commercial door hinges. No specific compatible hinge models were provided in product data — verify hinge pin diameter and hinge leaf clearance before installation.

Installation Notes

Installation requires removing the hinge pin from an existing door hinge and threading the stop onto the pin before reinserting. No special tools are typically required beyond a hammer or pin punch to remove and reseat the hinge pin. Ensure the door is supported or held in place during hinge pin removal to prevent the door from shifting. Confirm the stop arm can rotate freely to the desired limit position without contacting adjacent trim or hardware before finalizing placement.