Iscar 6002959 Cutoff Insert Dgn 2002C IC908 2mm

Product Description

The ISCAR 6002959 is a solid carbide cutoff and grooving insert from the Do-Grip series, designed for precision parting and grooving operations on CNC lathes and turning centers. It carries the IC908 manufacturer grade with a PVD coating process, delivering wear resistance across a broad range of workpiece materials. The insert features a 2.00 mm cutting width and a neutral lead angle with a 0-degree lead angle geometry, making it suitable for straight-in parting and symmetric grooving cuts. Licensed machinists and CNC operators working in production or job-shop environments rely on this insert for consistent, repeatable results.

This insert is intended for grooving and parting applications on universal workpiece materials, including materials coded H, K, M, P, and S under ISO classification. The Do-Grip clamping system holds the insert securely in compatible toolholders, reducing deflection during deep grooving passes. With a maximum depth of cut of 18.00 mm, it handles most standard parting and groove depths encountered in turning operations. It is well-suited for both high-production runs and short-run precision work.

Key Features

• IC908 grade with PVD coating for extended tool life across universal workpiece materials
• 2.00 mm cutting width with neutral hand and 0-degree lead angle for straight parting cuts
• Maximum depth of cut of 18.00 mm for deep grooving and full parting operations
• Corner radius of 0.20 mm for controlled edge geometry and surface finish
• C chipbreaker geometry suited for grooving and parting chip control
• Clamp-style insert holding via the Do-Grip system for rigid, repeatable seating
• Conforms to ISO 13399 standards for tooling data and interoperability

Compatibility

Designed for use with Do-Grip series toolholders that accept the DGN 2002C insert style. Compatible with workpiece material groups H, K, M, P, and S as defined by ISO material classification. Verify toolholder seat and clamping compatibility before installation.

Installation Notes

Insert installation should be performed by a qualified machinist or CNC tooling technician with the machine spindle stopped and all axes at rest. Use the appropriate torque wrench and clamp screw specified by the toolholder manufacturer — do not over-tighten the clamping screw. Inspect the insert pocket for chips or debris before seating the insert, and confirm the insert is fully seated before returning the machine to operation.