Iscar 6002614 Dgn 2202J Cutoff Insert 2.2mm Grooving

Product Description

The ISCAR 6002614 is a solid carbide cutoff and grooving insert in the Do-Grip series, designed for parting and grooving operations on CNC lathes and turning centers. It carries the DGN 2202J geometry designation with an IC308 PVD-coated grade, making it well suited for high-temperature, work-hardening materials. The cutting width measures 2.20 mm (0.0866 inches) with a 0-degree neutral lead angle and a 0.20 mm corner radius. The double-ended design extends usable tool life before replacement. Licensed machinists and tooling technicians working in precision turning applications are the typical end users.

This insert is intended for grooving and parting applications where tight tolerances and clean chip evacuation are critical. The IC308 grade with PVD coating is rated primarily for superalloys, as well as steel and stainless steel workpiece materials per ISO material codes M, P, and S. The J chipbreaker geometry supports controlled chip flow in these demanding cuts. The clamp-style insert holding method is standard for Do-Grip style toolholders. Maximum depth of cut reaches 18.00 mm (0.7087 inches), making it viable for moderate-depth parting passes as well as shallow groove profiles.

Key Features

• DGN 2202J geometry with J chipbreaker for controlled chip flow in grooving and parting
• IC308 PVD-coated solid carbide grade optimized for superalloys, steel, and stainless steel
• 2.20 mm cutting width with 0-degree neutral lead angle for symmetrical, balanced cutting forces
• Double-ended insert design provides two usable cutting edges per insert
• Maximum depth of cut of 18.00 mm suits both shallow grooves and full parting passes
• Conforms to ISO 13399 tooling data standards for integration with CAM and tool management systems

Compatibility

Designed for use with Do-Grip series clamp-style grooving and parting toolholders that accept DGN 2202-style inserts. Confirm toolholder pocket specifications against the DGN 2202J insert dimensions before installation.

Installation Notes

Installation is performed by qualified machinists or tooling technicians. Power down and lock out the machine spindle before seating or removing the insert. Seat the insert fully into the Do-Grip toolholder pocket and verify the clamp is secure before resuming cutting. Do not exceed the maximum depth of cut rating for the insert or the toolholder, and inspect the cutting edges for wear or chipping at regular intervals.