Iscar 6002525 Cutoff Insert Dgr 3102C-8D IC328 3.1mm

Product Description

The ISCAR 6002525 is a solid carbide cutoff and parting insert from the Do-Grip series, identified by the manufacturer catalog designation DGR 3102C-8D with grade IC328. It features a 3.10 mm (0.1220 inch) cutting width, an 8-degree right-hand lead angle, and a PVD coating applied to the carbide substrate. The IC328 grade is formulated for cutting superalloys and similarly demanding workpiece materials. This double-ended insert uses a clamp holding method and is sized for use on compatible Do-Grip toolholders in production parting and grooving operations. Licensed machinists and CNC toolroom technicians are the primary installers.

This insert is suited for parting, grooving, and cutoff operations on superalloys and other difficult-to-machine materials. The C chipbreaker geometry and 0.20 mm (0.0079 inch) corner radius support controlled chip formation in tight tolerance work. With a maximum depth of cut of 18.00 mm (0.7087 inch) and an overall length of 21.10 mm (0.8307 inch), it fits standard Do-Grip toolholder pockets used on CNC lathes and turning centers in both job shop and production environments.

Key Features

• Solid carbide construction with PVD coating for wear resistance on superalloys
• 3.10 mm cutting width with 8-degree right-hand lead angle for controlled parting cuts
• Double-ended insert design extends usable tool life per insert
• C chipbreaker geometry promotes chip control in superalloy and difficult-material applications
• 0.20 mm corner radius reduces edge stress at the start and end of cut
• Conforms to ISO 13399 tooling data standards for compatibility identification

Compatibility

Designed for use in ISCAR Do-Grip series clamp-style toolholders that accept the DGR 3102 insert size. Intended for CNC lathes and turning centers performing parting and grooving operations on superalloys and materials classified under ISO material codes M, P, and S. Material grades C2, C3, C5, and C6 apply.

Installation Notes

Insert seating and clamping should be performed by a qualified machinist or toolroom technician following the toolholder manufacturer torque and clamping specifications. Confirm the toolholder pocket is clean and free of chips before seating the insert. Always disengage the machine spindle and verify the machine is in a safe, locked-out state before changing inserts. Do not attempt to regrind or modify this insert.