Iscar 5667802 T-slot Replaceable Milling Tip Carbide IC908

Product Description

The ISCAR 5667802 is a T-slot replaceable milling tip designed for horizontal slot milling operations on a wide range of workpiece materials. Built from sub-micrograin carbide in the IC908 manufacturer grade, this tip delivers the edge stability and wear resistance required for demanding metal-cutting applications. The TiAlN coating, applied via PVD process, reduces heat buildup at the cutting edge during high-speed passes. With a 1.488-inch cutting diameter, a 0.25-inch cutting width, and 10 flutes, the 5667802 is engineered for efficient chip evacuation and smooth finish in T-slot profiles. Right-hand cut geometry and a 90-degree lead angle are standard on this tip.

This milling tip is suited for use in T-slot milling applications on machining centers and CNC milling platforms. It fits the SD-SP series tooling system and corresponds to the full tip description SD D1.50-H250D-SP17. Primary workpiece materials include steel, stainless steel, cast iron, non-ferrous metal, superalloys, titanium, and hard materials, covering ISO material codes P, M, K, N, S, and H. It is appropriate for both production and job-shop environments where replaceable-tip milling systems are standard practice.

Key Features

• Sub-micrograin carbide construction in IC908 grade for edge integrity in hard and abrasive materials
• TiAlN coating via PVD process for thermal resistance and extended tool life
• 10-flute design promotes high feed rates and smooth surface finish in T-slot profiles
• 1.488-inch cutting diameter with 0.25-inch cutting width for precise slot geometry
• 90-degree lead angle and right-hand cut orientation for straightforward setup
• Compatible with ISO material groups P, M, K, N, S, and H for broad application range

Compatibility

Designed for use with the ISCAR SD-SP series replaceable-tip milling system, insert size D1.50-H250D, with a 17-insert-pocket body designation. Conforms to ANSI standards.

Installation Notes

Installation is performed by a qualified machinist or toolroom technician on a CNC milling machine or machining center. The spindle must be fully stopped and the machine placed in a safe-off or lockout state before seating or removing the replaceable tip. Use the appropriate torx or clamping key specified by ISCAR for the SD-SP series interface to achieve proper seating torque without over-stressing the tip pocket. Verify runout and tip seating before resuming cutting operations.