Iscar 5622733 Milling Tip 3 Flute 0.500 in Carbide IC08

Product Description

The ISCAR 5622733 is a carbide end replaceable milling tip designed for the Multimaster MM EA modular tooling system. It features a 0.500 inch cutting width, a 0.315 inch maximum depth of cut, and three flutes arranged at a 45-degree helix angle. The tip is manufactured from sub-micrograin carbide in the IC08 grade and ships with a bright uncoated finish. This style of interchangeable tip is installed by machinists and toolroom professionals working with modular milling systems, replacing only the cutting end rather than the full tool assembly to reduce tooling cost and changeover time.

The ISCAR 5622733 suits slotting and milling operations across a broad range of workpiece materials including steel, stainless steel, cast iron, non-ferrous metals, superalloys, titanium, and hard materials. With a 90-degree lead angle and a 0.031 inch corner radius, it is well suited to square-shoulder slotting applications. The right-hand cut orientation and 0.650 inch functional length make it appropriate for moderate-depth slot milling in both production and job-shop environments. It extends 0.650 inches from the holder when seated.

Key Features

• Sub-micrograin carbide construction in IC08 grade for wear resistance in steel and hard materials
• 3-flute geometry with 45-degree helix angle for balanced chip evacuation
• 0.500 inch cutting width and 0.315 inch maximum depth of cut
• 90-degree lead angle with 0.031 inch corner radius for square-shoulder slotting
• Right-hand cut, bright uncoated finish, no chipbreaker
• End-replaceable design compatible with the ISCAR Multimaster MM EA modular system

Compatibility

Designed for use with the ISCAR Multimaster MM EA modular milling system. Insert size designation is .500B31R031. Conforms to ANSI standards. Confirm holder compatibility using the MM EA series designation before ordering.

Installation Notes

Installation is performed by machinists or toolroom technicians familiar with ISCAR Multimaster modular tooling. The machine spindle must be powered down and locked out before removing or seating any milling tip. Use the appropriate ISCAR torque key for the MM EA coupling interface and follow the tool manufacturer's assembly procedure. Do not substitute fasteners or overtighten by hand, as improper seating will affect runout and tool life.