Iscar 5622308 Roughing End Mill 5/8 in 4 Flute Tialn Carbide

Product Description

The ISCAR 5622308 is a single-end roughing end mill designed for aggressive material removal in milling operations. Built from submicron-grade solid carbide, it delivers rigidity and wear resistance during high-feed roughing passes. The 5/8-inch diameter cutting body features four spiral flutes with a right-hand cutting and right-hand flute direction. A TiAlN coating helps resist heat and extend tool life at elevated cutting speeds. The 45-degree chamfer angle and 38-degree maximum helix angle support chip evacuation and stable cutting engagement. This tool is intended for use in CNC machining centers and manual mills where consistent stock removal is required.

This roughing end mill suits ferrous and non-ferrous metal removal applications in production and job-shop environments. The regular-length configuration and straight cylindrical shank fit standard ER collets and end mill holders. With a 1.25-inch length of cut and 1.87-inch reach length, it handles moderate-depth roughing passes without extended-reach tooling. The non-center-cutting design means it is intended for side milling and ramping applications, not for direct plunge cutting. Machinists and CNC programmers working on steel, alloy steel, and similar materials will find this tool appropriate for pre-finishing stock removal passes.

Key Features

• Submicron-grade solid carbide construction for rigidity and extended tool life
• TiAlN coating for heat resistance and wear reduction at high cutting speeds
• Four spiral flutes with right-hand cut and right-hand flute direction
• 45-degree chamfer angle with 0.02-inch chamfer width for edge stability
• 38-degree maximum helix angle to support chip flow and cutting stability
• Straight cylindrical shank for compatibility with standard collet and end mill holder systems

Compatibility

Designed as an OEM-style replacement or direct-fit tool for CNC machining centers and manual milling machines accepting a 5/8-inch straight cylindrical shank end mill.

Installation Notes

Installation is performed by qualified machinists or CNC tooling technicians. Ensure the machine spindle is fully stopped and the tool changer or collet nut is properly torqued using the collet nut specifications provided by the toolholder manufacturer. Confirm runout is within acceptable limits before beginning a cut. This tool is not center-cutting and should not be used for direct plunge entry into solid material.