Iscar 5622035 Ball Nose Milling Tip 4 Flute 0.75in IC908

Product Description

The ISCAR 5622035 is a ball nose replaceable milling tip from the Multimaster (MM EB) series, designed for use with compatible Multimaster modular tool holders. Built from sub-micrograin carbide in grade IC908 with a PVD-applied TiAlN coating, this tip delivers wear resistance and thermal stability across demanding milling operations. The four-flute, right-hand configuration provides a 0.75-inch cutting width, a maximum depth of cut of 0.62 inches, and a functional length of 1.0 inch. A 30-degree helix angle promotes smooth chip evacuation, while the 90-degree lead angle and ball nose geometry support profiling, contouring, and slotting applications. Coolant-through capability is not available on this tip.

This milling tip is suited for machining steel, stainless steel, cast iron, non-ferrous metals, superalloys, titanium, and hard materials, covering ISO material codes P, M, K, N, S, and H. It is appropriate for both roughing and semi-finishing passes on CNC machining centers where a modular Multimaster connection is in use. The replaceable tip design reduces tooling changeover time and supports repeatable runout performance without removing the holder from the spindle.

Key Features

• Ball nose geometry for profiling, contouring, and 3D surface milling
• IC908 sub-micrograin carbide grade with PVD TiAlN coating for extended tool life
• Four flutes with 30-degree helix angle for efficient chip flow
• 0.75-inch cutting width and 0.62-inch maximum depth of cut
• Right-hand cut, 90-degree lead angle, ANSI standard compliant
• Replaceable tip interface reduces downtime and holder investment

Compatibility

Designed for use with ISCAR Multimaster (MM EB) series modular tool holders accepting the .750A62 tip size. Confirm holder interface compatibility before ordering.

Installation Notes

Installation of replaceable milling tips should be performed by a qualified machinist or tooling technician. Ensure the spindle is fully stopped and locked out before tip removal or installation. Use the appropriate ISCAR Multimaster torque wrench or assembly tool as specified by the holder manufacturer to achieve proper seating. Inspect the mating surfaces of the holder for chips or debris before threading in the new tip.