Iscar 5603723 Milling Insert Hp Adkt 2207PDTR IC908 Carbide

Product Description

The ISCAR 5603723 is a solid carbide milling insert carrying the ANSI designation HP ADKT 2207PDTR in manufacturer grade IC908. It belongs to the HELIPLUS series and is designed for high-performance face and shoulder milling operations. The insert features a parallelogram shape with an 85-degree included angle, a positive rake geometry, and a T-Land cutting edge style. The IC908 grade uses a submicron carbide substrate with a PVD-applied TiAlN coating, making it well suited for demanding interrupted and continuous cuts. Installation is performed by licensed machinists and tooling technicians using a screw-clamp holding method on compatible milling tool bodies.

This insert is intended for use in milling applications across a broad range of workpiece materials including steel, stainless steel, cast iron, superalloys, titanium, and hard materials. It is a right-hand insert with a PDTR chip breaker geometry optimized for chip control across those material groups. The insert is compatible with the HP F90-22 cutter series. Typical applications include roughing and semi-finishing passes in production machining environments, both in job shop and high-volume manufacturing settings.

Key Features

• IC908 grade with PVD TiAlN coating for extended tool life in steel, stainless, and hard material cutting
• Positive rake and T-Land cutting edge geometry for reduced cutting forces and improved chip flow
• PDTR chip breaker design provides reliable chip control across multiple material groups
• Maximum depth of cut of 0.8900 inches (22.60 mm) supports aggressive material removal rates
• Screw-clamp holding method ensures secure, repeatable insert seating
• Single-sided, right-hand insert with 2 cutting edges per insert

Compatibility

Designed for use with the ISCAR HP F90-22 cutter series. Conforms to ANSI and ISO 13399 standards. The ANSI code is HP ADKT 2207PDTR IC908 and the ISO code is HP ADKT 2207PDTR.

Installation Notes

Insert replacement should be performed by a qualified machinist or tooling technician with the spindle powered down and machine locked out per applicable safety procedures. Use the manufacturer-specified torx or hex key to seat the clamping screw to proper engagement without over-torquing the insert pocket. Inspect the insert pocket and seating surfaces for chips or debris before installing a new insert. Confirm correct insert hand orientation before resuming cutting operations.