Iscar 5601833 Milling Insert Oemt 060405AER-76 IC28 Carbide

Product Description

The ISCAR 5601833 is a solid carbide milling insert carrying ANSI designation OEMT 060405AER-76 IC28, designed for use in high-efficiency face and shoulder milling operations. The insert features an octagonal shape with 8 cutting edges, a positive rake geometry, and a T-Land cutting edge style that suits non-ferrous metal applications. It measures 0.5618 inches in inscribed circle diameter and 0.1870 inches thick. The IC28 grade is an uncoated (bright finish) solid carbide, well-suited for cutting non-ferrous materials such as aluminum and copper alloys at elevated speeds. Installation is performed by licensed machinists and CNC tooling professionals.

This insert belongs to the HELIOCTO series and is intended for use in milling cutters designed for non-ferrous metal workpiece materials. It carries a neutral hand designation, allowing flexible orientation in compatible toolholders. The maximum depth of cut is 0.0980 inches (2.50 mm), and the cutting edge effective length matches that value. The insert is held in place by a screw-type clamping method. Compatible cutter series include HOF-R06 and HOE-R06 as stated by the manufacturer.

Key Features

• Octagonal insert shape with 8 cutting edges for extended tool life per insert
• IC28 uncoated solid carbide grade optimized for non-ferrous metal cutting
• Positive rake angle with T-Land edge style for clean, efficient chip formation
• Maximum depth of cut of 0.0980 inches (2.50 mm) per pass
• Corner radius of 0.0197 inches (0.50 mm) for controlled edge engagement
• Compliant with ANSI and ISO 13399 standards

Compatibility

Compatible with HELIOCTO series milling cutter bodies HOF-R06 and HOE-R06 as specified by the manufacturer. Insert size code 060405 with inscribed circle range of 0.5100 to 0.6000 inches. Confirm toolholder seating and clamping torque requirements with the cutter body documentation before installation.

Installation Notes

This insert is installed by qualified machinists or CNC tooling technicians using the screw-type clamping method standard to HELIOCTO cutter bodies. Always power down and lock out the spindle before changing inserts. Inspect the insert pocket for chips, burrs, or damage before seating the new insert. Do not exceed the rated depth of cut or feed rate parameters specified for the cutter body in use.