Iscar 5601256 Milling Insert Adkr 1505PDR-HM IC328 Carbide

Product Description

The ISCAR 5601256 is a solid carbide milling insert carrying the manufacturer designation ADKR 1505PDR-HM in grade IC328. This single-sided, right-hand insert features a parallelogram shape with an 85-degree included angle and a 0.0315-inch corner radius. It is coated with TiCN via a PVD process and carries a positive rake geometry with a honed cutting edge. With two cutting edges and a maximum depth of cut of 0.472 inches, it is designed for productive milling in steel, stainless steel, superalloys, and titanium. Installation and replacement are performed by licensed machinists and tooling technicians working on milling machine setups.

This insert is intended for use in the ISCAR HELIMILL series, specifically within the HM90-15 cutter series. It fits applications involving steel, stainless steel, superalloys, and titanium workpieces, covering material grade classifications C2, C3, C5, and C6. Typical use cases include face milling, shoulder milling, and general material removal operations where positive rake geometry and PVD-coated carbide tooling are specified. The HM chip breaker geometry supports controlled chip formation across these material categories.

Key Features

• TiCN PVD coating for wear resistance on steel, stainless steel, superalloys, and titanium
• Positive rake geometry with honed cutting edge style for clean, efficient cutting action
• Two cutting edges per insert for extended tooling value on single-sided design
• Maximum depth of cut of 0.472 inches suitable for moderate to aggressive milling passes
• Screw-held mounting method for secure, repeatable seating in compatible cutter bodies
• Conforms to ANSI and ISO 13399 standards for dimensional and designation consistency

Compatibility

Designed for use with the ISCAR HELIMILL HM90-15 cutter series. Compatible with material grades C2, C3, C5, and C6. ANSI code: ADKR 1505PDR-HM IC328. ISO code: ADKR 1505PDR-HM.

Installation Notes

This insert is installed and replaced by machinists or CNC tooling technicians. Always power down and lock out the machine spindle before changing inserts. Use the appropriate torx or hex key specified by the cutter body manufacturer to secure the insert screw to the recommended seating torque per the cutter body documentation. Inspect the insert pocket and seating surfaces for chips or debris before installing a new insert.