Iscar 5600513 Milling Insert Adkt 1505PDR-HM IC520M Carbide

Product Description

The ISCAR 5600513 is a solid carbide milling insert carrying the ANSI designation ADKT 1505PDR-HM in manufacturer grade IC520M. It features a parallelogram shape with an 85-degree included angle, a positive rake geometry, and a honed cutting edge for consistent chip formation. The CVD-applied TiCN coating provides wear resistance across a range of workpiece materials. With a maximum depth of cut of 0.472 inches and a cutting edge effective length of 0.541 inches, this right-hand insert is suited for productive face and shoulder milling operations on machining centers and CNC mills. The insert is held by screw and is a single-sided design with two cutting edges per insert.

This insert is designed for use in the ISCAR HELIMILL platform and is compatible with cutter series ETS, FTS, ADK, and E90. Primary workpiece material applications include steel, stainless steel, and cast iron, corresponding to ISO material codes P, M, and K. The HM chip breaker geometry supports stable cutting across these material groups. It is suited for both roughing and semi-finishing operations in shop and production environments where reliable tool life and process consistency are priorities.

Key Features

• CVD-applied TiCN coating for extended wear resistance on steel, stainless steel, and cast iron
• Positive rake, honed cutting edge style for reduced cutting forces and clean chip evacuation
• Two cutting edges per insert — screw-held, single-sided design
• Maximum depth of cut 0.472 inches (12.00 mm) with 0.541-inch effective cutting edge length
• Corner radius of 0.0315 inches (0.80 mm) for controlled surface finish at the insert nose
• Conforms to ANSI and ISO 13399 standards for tool data exchange compatibility

Compatibility

Compatible with ISCAR HELIMILL cutter series ETS, FTS, ADK, and E90. Rated for material grades C2, C3, C5, and C6. Insert size code 1505 with inscribed circle range 0.3500 to 0.4000 inches and length range 0.6000 to 0.6500 inches.

Installation Notes

Installation is performed by a qualified machinist or tooling technician on a powered-down spindle with all machine motion halted and energy isolation confirmed. Secure the insert into the cutter body pocket using the designated clamping screw — do not overtighten or substitute fasteners. Verify seating and pocket cleanliness before torquing to ensure full contact across the insert face. Follow the cutter body manufacturer's pocket specification and tool assembly procedures for the applicable HELIMILL series body.