Iscar 3602068 Indexable Boring Bar Right Hand S-sclc

Product Description

The ISCAR 3602068 is a right-hand S-SCLC indexable boring bar designed for internal turning operations on CNC and manual lathes. It accepts CC.T 2 diamond-shaped inserts held by a screw-clamping method, providing secure insert retention during interrupted and continuous cuts. The shank diameter is 0.375 inches and the overall length is 6 inches, making it suitable for reaching moderate bore depths. With a minimum bore diameter of 0.449 inches and a maximum bore depth of 0.75 inches, this tool is built for precision small-bore finishing and semi-finishing work. The negative rake geometry at -7 degrees supports stable cutting in a variety of workpiece materials.

This boring bar is used in precision machining environments where tight tolerances on internal diameters are required. It belongs to ISCAR's Isoturn series and is suited for turning centers and manual lathes in job shops, production machining facilities, and toolroom settings. Machinists and CNC operators working with small-bore components will find this tool appropriate for ferrous and non-ferrous turning applications. Coolant-through capability is not included on this holder.

Key Features

• Minimum bore diameter of 0.449 inches for small internal turning work
• Maximum bore depth of 0.75 inches
• Accepts CC.T 2 diamond-shaped inserts with screw-clamp holding method
• Negative rake angle of -7 degrees for stable cutting performance
• Right-hand cutting direction; part of the Isoturn series
• Conforms to ISO 13399 tooling data standards

Compatibility

Designed to accept CC.T 2 compatible insert size code 2 diamond-shaped inserts. Intended for use in S-SCLC style boring bar applications within the ISCAR Isoturn series.

Installation Notes

This boring bar should be installed by a qualified machinist following the machine tool manufacturer's setup procedures. Secure the shank fully in the tool holder or turret before operation and verify runout with a dial indicator. Shut down and lock out the machine before changing inserts or adjusting the tool position. Follow the insert manufacturer's recommended cutting parameters for the specific workpiece material.