Ips 16212 Pvc Cpvc Uv Glow Clear Primer 1 Qt

Product Description

The IPS 16212 is a clear, UV-glow, ultra-low VOC primer formulated for use on PVC and CPVC pipe and fittings before solvent cement application. When exposed to UV light, the applied primer fluoresces purple, giving installers and inspectors a reliable visual confirmation that priming was completed. The formula is THF-free, reducing fume exposure during application. It rapidly softens and dissolves joining surfaces to prepare them for a proper solvent-welded bond. Licensed plumbers and pipefitters working on potable water, drainage, and irrigation systems use this primer as a required pre-step before cementing joints.

The 16212 is suited for residential and commercial plumbing applications involving PVC and CPVC pipe and fittings. It is commonly used in water supply lines, drain-waste-vent systems, and irrigation installations where code compliance is required. The 1-quart can includes an applicator cap for direct, controlled application. The UV-glow feature makes it practical on job sites subject to third-party inspection, as the applied primer is visible under UV light without disturbing the joint.

Key Features

• Clear primer with UV-glow response — fluoresces purple under UV light for inspection verification
• THF-free formula reduces fume exposure and is safer for installers in enclosed or low-ventilation areas
• Ultra-low VOC content meets SCAQMD Rule 1168 and 316A requirements
• Fast-acting chemistry rapidly softens and dissolves PVC and CPVC joining surfaces
• Code-compliant for use in jurisdictions with stringent VOC and solvent regulations
• 1-quart can with integrated applicator cap for controlled, consistent application

Compatibility

Designed for use on PVC and CPVC pipe and fittings prior to solvent cement application in plumbing, drainage, and irrigation systems.

Installation Notes

This primer is installed by licensed plumbers or pipefitters as a required step before solvent cementing PVC or CPVC joints per applicable plumbing codes such as the IPC and UPC. Ensure adequate ventilation during application even though the formula is low-fume. Shut off and depressurize any system being serviced before working on joints. Do not apply solvent cement until the primer has fully penetrated and softened the joining surfaces per the adhesive manufacturer instructions.

Technical Specifications

• Appearance: Clear with purple UV glow
• VOC Content: Ultra-low VOC
• THF Content: THF-free
• Container Size: 1 quart
• Applicator: Integrated applicator cap
• Certifications: Meets SCAQMD Rule 1168 and 316A
• Pipe Material Compatibility: PVC and CPVC

Standard Information

• Brand: IPS
• Manufacturer Part Number: 16212