Ipex 9861216 Cpvc Schedule 80 Nipple 1.5x4 Inch

Product Description

The IPEX 9861216 is a CPVC Schedule 80 threaded nipple designed to connect two female-threaded (FPT) fittings in industrial and commercial piping systems. Manufactured from Xirtec CPVC material, this nipple measures 1.5 inches in diameter and 4 inches in length. It is rated for a maximum service temperature of 200 degrees F under pressure, with occasional exposure to boiling water at 212 degrees F. The base material carries a design stress of 2,000 psi at 73 degrees F, making it suitable for demanding pressure applications. Plumbers and pipefitters working with corrosive media or high-temperature water systems specify Schedule 80 CPVC nipples where metal fittings would degrade over time.

This nipple is used in residential and commercial hot and cold water distribution, chemical handling, and industrial process piping where corrosion resistance and thermal performance are required. The threaded-both-ends (TBE) configuration allows direct installation between any two standard female NPT or FPT fittings without additional adapters. It is commonly installed in boiler rooms, mechanical rooms, and process lines where elevated temperatures and pressures are routine service conditions.

Key Features

• CPVC Schedule 80 construction rated to 2,000 psi design stress at 73 degrees F
• Maximum service temperature of 200 degrees F under pressure
• Withstands occasional boiling water exposure up to 212 degrees F
• Will not rust, pit, scale, or corrode on interior or exterior surfaces
• Threaded both ends (TBE) for direct connection to two FPT fittings
• Low-energy production footprint compared to equivalent carbon steel or steel alloy pipe

Compatibility

Designed as an OEM-style replacement or new-installation component for CPVC Schedule 80 threaded piping systems using standard NPT female threaded fittings in 1.5-inch nominal pipe size.

Installation Notes

A licensed plumber should install this nipple in accordance with applicable local plumbing codes and ASTM standards for CPVC Schedule 80 systems. Shut off and depressurize the line completely before removing or installing any threaded fitting. Use CPVC-compatible thread sealant or tape only — do not use petroleum-based compounds, which can degrade CPVC material. Do not over-torque the connection, as excessive force can crack Schedule 80 CPVC fittings.

Technical Specifications

• Material: CPVC (Xirtec)
• Schedule: Schedule 80
• Nominal Pipe Size: 1.5 inches
• Length: 4 inches
• End Type: Threaded Both Ends (TBE / FPT)
• Maximum Service Temperature: 200 degrees F (93 degrees C) under pressure
• Maximum Temperature (Occasional Exposure): 212 degrees F (100 degrees C)
• Design Stress: 2,000 psi at 73 degrees F (23 degrees C)

Standard Information

• Brand: IPEX
• Manufacturer Part Number: 9861216