Ipex 409012 Pvc Sch 40 Street 90 Elbow 1-1/4 in

Product Description

The IPEX 409012 is a Schedule 40 PVC street 90-degree elbow with a 1-1/4 inch spigot x slip end connection. It is injection molded from Type 1 PVC and carries a pressure rating of 370 psi at 73 degrees F. The white finish and NSF/ANSI 14/61G listing make it suitable for drinking water systems as well as a wide range of other fluid-handling applications. Licensed plumbers and irrigation contractors install this fitting as a standard directional change in pressure piping systems. It conforms to ASTM D1784, D2466, and F1970 material and dimensional specifications.

This elbow is used across residential and commercial plumbing, irrigation, pool and spa, and industrial piping installations. The spigot inlet allows the fitting to insert directly into a standard Schedule 40 socket, eliminating the need for a coupling at that end and reducing overall assembly length. It is suited for above-ground and below-ground pressure applications within the temperature and pressure limits of Schedule 40 PVC systems.

Key Features

• Schedule 40 PVC construction rated to 370 psi at 73 degrees F
• Street configuration: spigot x slip ends for direct socket insertion
• 90-degree angle for compact directional changes in piping runs
• NSF/ANSI 14 and 61G listed for potable drinking water systems
• Meets ASTM D1784, D2466, and F1970 specifications
• Injection molded Type 1 PVC with white finish

Compatibility

Designed for use with 1-1/4 inch Schedule 40 PVC pressure piping systems in plumbing, irrigation, pool and spa, industrial, and drinking water applications per NSF/ANSI 61G.

Installation Notes

Installation should be performed by a licensed plumber or qualified pipefitter in accordance with applicable local plumbing codes and ASTM standards. Depressurize and drain the system completely before cutting or modifying any piping. Use a compatible PVC solvent cement and primer rated for Schedule 40 pressure service, and allow full cure time before restoring pressure. Do not exceed the pressure or temperature derating limits specified for Schedule 40 PVC in the service environment.

Technical Specifications

• Material: Type 1 PVC
• Finish: White
• Schedule: Schedule 40
• Size: 1-1/4 inches
• End Connection: Spigot x Slip
• Angle: 90 degrees
• Pressure Rating: 370 psi at 73 degrees F
• Applicable Standard: ASTM D1784, D2466, F1970
• Certifications: NSF/ANSI 14, NSF/ANSI 61G
• Manufacturing Process: Injection Molded
• Markets: Irrigation, Plumbing, Industrial, Pool and Spa, Drinking Water

Standard Information

• Brand: IPEX
• Manufacturer Part Number: 409012