Ipex 300p8090dsch80elb Pvc Sch80 Conduit 90 Deg Elbow 3 in

Product Description

The IPEX 300p8090dsch80elb is a 3-inch Schedule 80 PVC conduit 90-degree elbow with plain ends, designed for use in electrical raceway systems that require heavier wall construction and greater impact resistance than Schedule 40 fittings. Schedule 80 PVC provides increased wall thickness, making this elbow suitable for exposed installations, mechanical rooms, and industrial environments where conduit is subject to physical contact or abuse. Electricians use this fitting to change conduit direction by 90 degrees in both underground and above-grade conduit runs. Plain ends accept solvent-weld connections for a secure, permanent joint.

This elbow is used in commercial and industrial electrical installations where rigid PVC conduit systems require direction changes. It is appropriate for indoor and outdoor above-grade applications, direct-burial runs, and encased concrete installations where Schedule 80 wall thickness meets code or specification requirements. The 3-inch trade size accommodates larger conduit runs typical in panel feeders, service entrances, and high-capacity branch circuits.

Key Features

• Schedule 80 PVC construction provides heavier wall thickness than Schedule 40 for added mechanical protection
• 90-degree bend angle for routing conduit around corners and obstacles
• 3-inch trade size suits larger-capacity electrical feeder and service runs
• Plain-end design for solvent-weld installation with standard PVC conduit cement
• PVC material is corrosion-resistant and suitable for damp, wet, and corrosive environments

Compatibility

Designed as an OEM-style fitting for use with 3-inch Schedule 80 rigid PVC electrical conduit systems installed per applicable NEC requirements.

Installation Notes

Installation should be performed by a licensed electrician in accordance with the National Electrical Code (NEC) and applicable local codes. De-energize all circuits in the conduit run before beginning work. Clean conduit and fitting mating surfaces thoroughly before applying solvent cement, and allow adequate cure time before pulling wire. Do not use this fitting as a structural support member.

Technical Specifications

• Trade Size: 3 inches
• Schedule: Schedule 80
• Material: PVC
• Bend Angle: 90 degrees
• End Type: Plain End
• UPC: 98006006328

Standard Information

• Brand: IPEX
• Manufacturer Part Number: 300p8090dsch80elb