Ipex 212p4022-1/2dsch40elb Pvc Sch40 45 Deg Elbow

Product Description

The IPEX 212p4022-1/2dsch40elb is a 2.5-inch trade size PVC Schedule 40 conduit 45-degree elbow with plain ends. It is a standard-radius fitting designed to redirect conduit runs at a 45-degree angle in electrical raceway systems. The elbow is manufactured from PVC with a 10.5-inch bend radius and plain-end terminations that accept solvent-cement joining. Electricians and electrical contractors use this fitting in above-ground and underground conduit installations where rigid PVC raceway is specified.

This elbow is suited for residential, commercial, and light industrial electrical conduit systems where PVC Schedule 40 raceway is required. It is used to route wire and cable runs around obstructions or change conduit direction in both exposed and concealed applications. The plain-end design requires standard PVC conduit cement and primer for a solvent-welded joint. It is a direct-install fitting that requires no threading and works with standard 2.5-inch PVC Schedule 40 conduit bodies and couplings.

Key Features

• 2.5-inch trade size fits standard Schedule 40 PVC conduit systems
• 45-degree angle for moderate direction changes in conduit runs
• Standard radius design with 10.5-inch bend radius
• Plain-end terminations accept solvent-cement joining — no threading required
• PVC construction resists moisture, corrosion, and common chemical exposure

Compatibility

Designed as an OEM-style replacement and standard fitting for 2.5-inch Schedule 40 PVC electrical conduit systems.

Installation Notes

Installation is performed by licensed electricians in accordance with applicable NEC requirements for PVC conduit raceway systems. Power down all circuits in the affected conduit run before pulling wire. Clean and dry both mating surfaces, apply PVC conduit primer, and follow with solvent cement rated for Schedule 40 PVC conduit fittings before joining. Allow full cure time per the cement manufacturer's guidance before handling or back-filling.

Technical Specifications

• Material: PVC
• Trade Size: 2.5 inches
• Bend Radius: 10.5 inches
• Elbow Angle: 45 degrees
• End Type: Plain End
• Schedule: Schedule 40
• Type: Standard Radius

Standard Information

• Brand: IPEX
• Manufacturer Part Number: 212p4022-1/2dsch40elb