Ipex 034p8090dsch80elb Pvc Sch80 90 Degree Elbow 3/4 in

Product Description

The IPEX 034p8090dsch80elb is a 3/4-inch Schedule 80 PVC conduit 90-degree elbow with plain ends, designed to redirect electrical conduit runs at a right angle in both exposed and concealed installations. Constructed from rigid PVC, Schedule 80 wall thickness provides greater impact resistance and crush strength compared to Schedule 40, making it well suited for locations where mechanical protection is a priority. This fitting accepts standard 3/4-inch trade-size rigid PVC conduit and is installed by licensed electricians working on residential, commercial, and industrial wiring systems.

This elbow is used wherever a 90-degree direction change is required in a PVC conduit system. Its plain-end design allows field installation using standard PVC conduit cement and primer, giving the installer a solvent-welded, weather-resistant joint. Standard-radius geometry keeps wire pulling manageable while conforming to typical code-required bend specifications. Common applications include underground conduit runs, exposed exterior routing, and indoor applications in areas subject to physical abuse where heavier wall thickness is required.

Key Features

• Schedule 80 PVC wall thickness for increased impact and crush resistance over Schedule 40
• 3/4-inch trade size fits standard 3/4-inch rigid PVC conduit
• Plain-end design for solvent-cement field installation
• Standard-radius sweep for manageable wire and cable pulling
• PVC construction resists corrosion, moisture, and most chemicals

Compatibility

Designed as an OEM-style fitting for use with 3/4-inch trade-size Schedule 80 rigid PVC electrical conduit systems.

Installation Notes

Installation is performed by a licensed electrician in accordance with the National Electrical Code (NEC). De-energize all circuits in the conduit run before beginning work. Use the appropriate PVC conduit primer and cement rated for Schedule 80 fittings, and allow full cure time before pulling wire. Avoid over-stressing the fitting during wire pull-in to prevent joint separation or cracking.

Technical Specifications

• Material: PVC
• Trade Size: 3/4 inch
• Schedule: Schedule 80
• Bend Angle: 90 degrees
• End Type: Plain End
• Radius Type: Standard Radius

Standard Information

• Brand: IPEX
• Manufacturer Part Number: 034p8090dsch80elb