Intertape PG21..29 Masking Tape 4 in 60 Yd Tan Paper

Product Description

The INTERTAPE PG21..29 is a general-purpose paper masking tape designed for paint masking, bundling, and surface protection applications. At 4 inches wide and 60 yards long, this roll covers large surface areas efficiently, making it well suited for commercial and residential painting projects. The tape measures 7.3 mil thick and delivers a tensile strength of 26 lb/in, providing reliable hold during application and removal. The tan paper backing is conformable, allowing it to follow curves and irregular surfaces without lifting at the edges. Licensed painters, finishing contractors, and facilities maintenance crews are the primary installers of this product.

This tape is engineered for interior and exterior paint masking where crisp paint lines are required. Its paint flake-resistant construction helps prevent paint film from tearing through the tape edge during removal. The 4-inch width is practical for masking wide trim, door frames, baseboards, and large flat surfaces. Recommended for hot to warm removal, the tape removes cleanly after exposure to temperatures up to 325 degrees F for 30 minutes, reducing the risk of adhesive residue transfer on finished surfaces.

Key Features

• Conformable paper backing follows curves and irregular surface profiles
• Delivers crisp paint lines with paint flake-resistant edge performance
• Rated for clean removal after exposure up to 325 degrees F for 30 minutes
• 26 lb/in tensile strength resists tearing during application and removal
• 7.3 mil total thickness provides consistent adhesive contact on flat and contoured surfaces
• 4-inch width reduces the number of strips needed on wide masking areas

Compatibility

Designed as a general-purpose masking tape for use on standard painted surfaces, trim, glass, metal, and similar substrates in residential and commercial painting applications.

Installation Notes

Surface preparation is critical before application - ensure the substrate is clean, dry, and free of dust or grease for proper adhesion. Press the tape firmly along the entire edge using a putty knife or seam roller to seat the adhesive and prevent paint bleed. Remove the tape while the paint is still slightly warm or immediately after baking for best results; cold removal is possible but increases the risk of residue. Follow applicable surface protection guidelines and the coating manufacturer's masking recommendations for the specific paint system being applied.