Intertape PG21..180 Masking Tape 38mm 60yd 7.3mil White

Product Description

The INTERTAPE PG21..180 is a white paper masking tape designed for professional painting, finishing, and surface-protection applications. It measures 38 mm wide and 60 yards long with a 7.3 mil thickness, giving it the body needed to hold crisp paint lines without tearing during application or removal. The rubber adhesive provides consistent tack across a range of surfaces, and the backing delivers 26 lb/in tensile strength to resist splitting under tension. This tape is handled by painters, auto-body techs, woodworkers, and finishing contractors who need a dependable masking solution for multi-step coating work.

This tape is suited for both residential and light commercial finishing environments. It conforms to irregular surfaces and holds up against solvent-based topcoats, lacquers, and urethane finishes. It is appropriate for use on metal, unfinished wood, lacquer-coated surfaces, and urethane-finished substrates. The backing resists paint flaking and tearing during removal. Removal is recommended while the tape is warm to hot, and the tape removes cleanly after exposure to temperatures up to 325 degrees F for 30 minutes, making it compatible with low-bake finishing cycles common in auto-body and industrial paint booths.

Key Features

• 38 mm wide, 60 yd long roll with 7.3 mil total thickness for substantial backing body
• Rubber adhesive delivers reliable tack and clean removal without adhesive residue
• 26 lb/in tensile strength backing resists tearing during masking and unmasking
• Lacquer-resistant and paint-flake-resistant for use under solvent-based coating systems
• Conformable construction follows contours on curved or irregular surfaces
• Rated for clean removal after exposure up to 325 degrees F for 30 minutes

Compatibility

Designed for use on metal, unfinished wood, lacquer-coated surfaces, urethane-finished surfaces, and glass. Compatible with solvent-based coating systems, lacquers, and urethane topcoats for overcoating applications.

Installation Notes

Surface should be clean, dry, and free of loose debris before tape is applied. Apply with firm, even pressure to ensure full adhesive contact, particularly on textured or contoured surfaces. Remove tape while warm or hot for cleanest results; cold removal is possible but increases the risk of adhesive residue. Do not leave tape in place beyond the recommended exposure window for your specific coating and cure process.