Intertape PG21..179 Masking Tape 1 in 60 Yd White

Product Description

The INTERTAPE PG21..179 is a general-purpose white paper masking tape designed for painting, masking, and surface protection tasks across a wide range of trade and industrial applications. Built on a conformable paper backing with a rubber adhesive, it measures 1 inch wide and runs 60 yards per roll, with a 7.3 mil total thickness. The rubber adhesive delivers a tensile strength of 26 pounds per inch, giving it reliable holding power on flat and moderately irregular surfaces. The backing is tear-resistant, making it easy to apply and remove by hand without a dispenser. Painters, finishers, and general contractors are the primary installers of this product.

This tape is suited for both residential and light commercial painting and finishing work. It is rated for use on unfinished wood, metal surfaces, glass, lacquer-coated surfaces, and urethane-finished surfaces. It is also compatible with overcoating using solvent-based systems and is lacquer-resistant and paint flake-resistant. The PG21..179 is recommended for hot to warm removal after paint application, and it removes cleanly after exposure to temperatures up to 325 degrees F for 30 minutes, making it appropriate for baked or heat-cured finish applications where many standard masking tapes would fail or leave residue.

Key Features

• Conformable white paper backing tears cleanly by hand without a dispenser
• Rubber adhesive provides 26 lb per inch tensile strength for secure hold during painting
• Rated for clean removal after exposure to temperatures up to 325 degrees F for 30 minutes
• Lacquer-resistant and paint flake-resistant for clean paint lines
• Suitable for glass, metal, unfinished wood, lacquer-coated, and urethane-finished surfaces
• Compatible with overcoating using solvent-based paint systems

Compatibility

Designed for use on glass, metal mixtures, unfinished wood, lacquer-coated surfaces, and urethane-finished surfaces, and compatible with solvent-based overcoating systems as stated in product specifications.

Installation Notes

This tape is typically applied by painters, finishing carpenters, and general trade workers as part of surface preparation and masking workflows. Ensure surfaces are clean, dry, and free of loose debris before application for best adhesion. For heat-cure or baked-finish applications, remove the tape while warm when possible for the cleanest edge. Do not leave tape on surfaces beyond the recommended exposure time or under conditions exceeding the rated temperature limit.