Ingersoll Cutting Tools 5873197 Milling Insert Aomt

Product Description

The INGERSOLL CUTTING TOOLS 5873197 is a solid carbide milling insert in a parallelogram shape designed for face and shoulder milling operations. Built to the AOMT insert style, it carries manufacturer grade IN2505 with a PVD-applied TiAlN plus TiN dual coating for extended tool life under demanding cutting conditions. The insert features 2 cutting edges, a positive rake geometry, and a sharp cutting edge style that reduces cutting forces and heat buildup. With an inscribed circle of 0.3250 inches and a thickness of 0.1900 inches, it is a right-hand, single-sided insert held in place by screw clamping. Licensed machinists and CNC tooling technicians are the primary installers for this component.

This insert is suited for milling steel, stainless steel, cast iron, superalloys, titanium, and hard materials, covering ISO material groups P, M, K, S, and H. It is appropriate for use in both production and job-shop environments where consistent surface finish and predictable tool life are required across a range of workpiece materials. The AOMT series geometry makes it a practical choice for positive-rake face milling and light-to-medium roughing passes. No chip breaker is present, making it best applied where chip control geometry is managed at the cutter body level.

Key Features

• Solid carbide micrograin substrate for hardness and wear resistance
• PVD TiAlN plus TiN dual coating for heat resistance and extended edge life
• Positive rake, sharp cutting edge style reduces cutting forces
• 2 cutting edges per insert, right-hand orientation
• Screw-held single-sided design for secure, repeatable seating
• Compliant with both ANSI and ISO standards; ANSI/ISO code AOMT120408R IN2505

Compatibility

Compatible with INGERSOLL cutter series 12J1X, 12S1X, 12V1X, 22J3X, 22N3X, and 2J1X per manufacturer specifications.

Installation Notes

Installation is performed by a qualified machinist or CNC tooling technician. Power down and lock out the machine spindle before seating or removing inserts. Use the correct torx or hex key torque driver recommended by the cutter body manufacturer when tightening the clamping screw - do not over-torque, as this can crack the insert or damage the pocket. Inspect the insert pocket and seating surfaces for chips or debris before installing a new insert.