Ingersoll Cutting Tools 5849008 Milling Insert ANHU160708R

Product Description

The INGERSOLL CUTTING TOOLS 5849008 is a solid carbide milling insert in the ANHU series, designed for high-performance metal removal in demanding milling applications. This double-sided, right-hand insert carries the manufacturer grade IN2530 and features a TiAlN and TiN PVD coating over a coarse grain carbide substrate. The insert measures 0.630 inches in length, 0.433 inches in inscribed circle diameter, and 0.417 inches in thickness, with four usable cutting edges and a 1/32 inch corner radius. It is engineered for licensed machinists and tooling professionals running production or job-shop milling operations.

This insert is suited for milling steel, stainless steel, superalloys, and titanium, covering material application codes P, M, and S. The negative rake geometry and chamfered cutting edge style help manage cutting forces and extend tool life in these demanding workpiece materials. Typical applications include face milling, shoulder milling, and copy milling where consistent edge life and dimensional control are priorities. The screw-holding method provides secure clamping in compatible toolholders. Compatible cutter series include 1TJ1N and TJ5N.

Key Features

• Solid carbide construction with coarse grain substrate for toughness and wear resistance
• TiAlN and TiN PVD dual coating for extended tool life in steel and high-temp alloys
• Double-sided insert with 4 cutting edges reduces per-edge tooling cost
• Negative rake and chamfered edge style for improved cutting stability
• 1/32 inch corner radius (0.0310 inches decimal) for controlled surface finish
• Conforms to ANSI and ISO standards; ANSI and ISO code ANHU160708R IN2530

Compatibility

Compatible with cutter series 1TJ1N and TJ5N. Designed for use with screw-clamping toolholders in the ANHU insert series. Suitable for machining steel, stainless steel, superalloys, and titanium workpiece materials.

Installation Notes

Installation should be performed by a qualified machinist or tooling technician. Ensure the milling cutter body and insert seat are clean and free of chips or debris before seating the insert. Use the correct torque screwdriver specified by the toolholder manufacturer when clamping the insert screw - do not over-torque. Inspect cutting edges and coating condition before each setup to confirm the insert is suitable for continued use.