Ingersoll Cutting Tools 5805584 Milling Insert AOMT1103PD-R

Product Description

The INGERSOLL CUTTING TOOLS 5805584 is a solid carbide milling insert in the AOMT series, designed for high-performance face and shoulder milling operations. This right-hand, single-sided insert carries a TiAlN coating applied via PVD process and is manufactured from micrograin solid carbide in grade IN2005. It features a parallelogram shape with a positive rake geometry and a sharp cutting edge style, providing clean, low-force cutting action. With two cutting edges per insert and a corner radius of 0.015 inches, it is suited for demanding metal removal tasks across a range of workpiece materials. Licensed machinists and tooling technicians install this insert in compatible milling cutter bodies.

This insert is rated for use on cast iron, stainless steel, carbon and alloy steel, superalloys, and titanium, covering ISO material codes K, M, P, and S. The AOMT1103PD-R geometry and IN2005 grade combination makes it well matched to both roughing and finishing passes in production milling environments, including CNC machining centers running tight tolerances on difficult-to-machine alloys. It conforms to ANSI and ISO standards and carries ANSI code AOMT1103PD-R IN2005.

Key Features

• Solid carbide micrograin substrate in grade IN2005 for wear resistance in tough alloys
• TiAlN PVD coating for high-temperature and oxidation resistance during dry or semi-dry cutting
• Positive rake, sharp cutting edge style reduces cutting forces on the workpiece
• Two usable cutting edges per insert to extend tooling value
• Right-hand cutting orientation with 0.015-inch corner radius for controlled corner engagement
• Screw-clamped insert holding method for secure, repeatable seating in the cutter body

Compatibility

Compatible with INGERSOLL cutter series 12J1F and 2J1F. Conforms to ANSI and ISO standards for AOMT-series insert seats.

Installation Notes

Installation should be performed by a qualified machinist or tooling technician with the spindle locked and machine power off. Use the correct torx or hex key per the cutter body manufacturer specification to torque the clamping screw - do not overtighten or use air tools. Inspect the insert seat for chips or debris before seating the insert, and confirm the insert is fully seated and flush before resuming cuts. Follow all applicable machine guarding and lockout/tagout procedures.