Ingersoll Cutting Tools 5800881 Milling Insert Carbide Apeb

Product Description

The INGERSOLL CUTTING TOOLS 5800881 is a solid carbide parallelogram milling insert designed for high-performance metal removal in milling applications. Built to ANSI and ISO standards under the APEB series, this insert carries grade IN30M with a coarse grain carbide substrate and a bright uncoated finish. It features a positive rake geometry, a sharp cutting edge style, and an 11-degree relief angle that reduce cutting forces on the workpiece. With two cutting edges per insert and a right-hand orientation, it delivers consistent chip control through its common chip breaker design. The insert is held in place via screw clamping and is suited for use in automated and manual milling setups.

This insert is intended for machining non-ferrous metals, making it a practical choice for aluminum, copper, and similar materials in both production and job-shop environments. It is compatible with Ingersoll cutter series 12J1B, 12J4B, 22J3B, 22J5B, 23J6G, and 2J1B. Typical applications include face milling, shoulder milling, and profile milling operations where sharp, uncoated carbide geometry provides surface finish and tool-life advantages over coated grades in non-ferrous materials. Installation is performed by qualified machinists or CNC tooling technicians.

Key Features

• Solid carbide construction with coarse grain substrate for toughness in non-ferrous milling
• Bright uncoated finish optimized for non-ferrous metal cutting where coating buildup is a concern
• Positive rake and sharp cutting edge style reduce cutting forces and heat generation
• 11-degree relief angle provides clearance and reduces flank wear
• Two cutting edges per insert extend usable tool life per piece
• Screw-clamp insert holding method for secure, repeatable seating in compatible cutter bodies

Compatibility

Compatible with Ingersoll cutter series 12J1B, 12J4B, 22J3B, 22J5B, 23J6G, and 2J1B. ANSI and ISO code APEB53R05 IN30M. Designed as a single-sided, right-hand insert for use in non-ferrous milling applications.

Installation Notes

Installation is performed by a qualified machinist or CNC tooling technician. Ensure the machine spindle is fully stopped and locked out before changing inserts. Use the correct torx or hex key for the clamping screw and verify the insert seats flush in the pocket before torquing. Inspect the insert pocket and clamping screw for wear or damage before fitting a new insert.