Ingersoll Cutting Tools 5120035 Replaceable Drill Tip 13.50mm

Product Description

The INGERSOLL CUTTING TOOLS 5120035 is a replaceable drill tip designed for use with indexable drill systems in metalcutting applications. This insert features a solid carbide construction in a micro grain grade, designated IN2505, and is coated via PVD process with a TiAlN and TiN finish for extended tool life in demanding cutting conditions. The tip has a 13.50mm cutting diameter, a 140-degree point angle, and a 2-flute configuration. It belongs to the TPA series and is held in place by a twist-lock method. The 5120035 is installed by machinists and toolroom technicians working with indexable drilling toolholders in production or job-shop environments.

This replaceable tip is suited for drilling operations across universal workpiece material categories, including ISO P, M, K, S, and H material groups. That range covers carbon steels, stainless steels, cast irons, superalloys, and hardened materials, making it appropriate for general-purpose production drilling where a single insert geometry handles mixed-material runs. The insert seat size is 13.5, corresponding directly to the cutting diameter. Coolant-through capability is supported, which aids chip evacuation and heat management at the cutting zone in deep-hole or high-feed drilling cycles.

Key Features

• Solid carbide construction in micro grain grade IN2505 for wear resistance
• PVD-applied TiAlN and TiN dual coating for thermal and abrasion protection
• 140-degree point angle reduces entry thrust and improves centering
• Coolant-through design supports chip evacuation in deep or interrupted cuts
• Twist-lock insert holding method for secure, repeatable tip indexing
• Compatible with ISO P, M, K, S, and H workpiece material groups

Compatibility

Designed as a replaceable indexable drill tip for TPA series toolholders with a 13.5 insert seat size, using ISO designation TPA1350R01. Confirm toolholder seat size and series before ordering.

Installation Notes

Installation is performed by qualified machinists or toolroom personnel following the toolholder manufacturer's indexing procedure. Power down and lock out the machine spindle before removing or seating the insert. Use the recommended torque tool or key specified by the toolholder manufacturer - do not use substitute drivers that may damage the seat or tip. Inspect the insert seat for chips or debris before seating a new tip to ensure proper registration and runout.