Import MPM-280-15 Male Tab Terminal 2.8mm 16-14 Awg 280-pack

Product Description

The IMPORT MPM-280-15 is a noninsulated male tab terminal designed for crimp-style wire connections in electrical and control wiring applications. The tab measures 2.80mm wide (approximately 0.110 inches) and accepts 16 to 14 AWG wire. The contact body is brass with a tin plating, providing reliable conductivity and corrosion resistance in dry and low-moisture environments. This package contains 280 terminals, making it well-suited for shops and technicians who install or terminate wiring in volume. Electricians and HVAC technicians commonly use male tab terminals when connecting control wiring to spade-style connectors on relays, contactors, and terminal blocks.

These terminals are used in residential and light commercial electrical work where a fast, tool-crimped spade connection is required. Typical applications include control panel wiring, appliance harness repair, relay connections, and low-voltage wiring terminations. The noninsulated design allows the terminal to seat fully into insulated connector housings or to be used with separate slip-on insulation sleeves when the application requires it. Sold in a 280-piece package with a minimum order quantity of 50 units.

Key Features

• 2.80mm tab width suits standard spade and quick-disconnect receptacles
• Crimp connection compatible with 16 to 14 AWG wire
• Brass contact material with tin plating for conductivity and corrosion resistance
• Noninsulated body allows use with separate insulation sleeves or insulated housings
• Package quantity of 280 terminals supports high-volume termination work

Compatibility

Designed for use with 16 to 14 AWG wire in crimp-style spade and quick-disconnect wiring applications where a 2.80mm noninsulated male tab terminal is specified.

Installation Notes

Installation is performed by electricians or HVAC technicians using a calibrated ratcheting crimp tool rated for the terminal and wire gauge. Always de-energize the circuit before terminating or connecting terminals. Strip wire to the manufacturer-recommended length to ensure full barrel engagement before crimping. Do not solder over a crimped connection unless the terminal is rated for combined crimp-and-solder use.