Ideal Tridon 6820051 Worm Gear Hose Clamp 3/4 to 1-3/4 Inch

Product Description

The IDEAL TRIDON 6820051 is a worm gear hose clamp from the 68-0 Series, designed to secure hose connections across a clamping range of 0.75 inches minimum to 1.75 inches maximum diameter. Constructed from 201 stainless steel, this clamp resists corrosion in wet and humid service environments. The band measures 9/16 inches wide, providing stable clamping force distribution along the hose bead. A rated torque of 8.5 Newton-meters governs proper tightening to seat the clamp without deforming the hose. Plumbers, HVAC technicians, and general mechanical trades use worm gear clamps like this on coolant, water supply, and duct hose assemblies where a reliable, adjustable seal is required.

The 6820051 suits residential and light commercial installations where hose-to-fitting connections need a secure, removable clamp. Typical applications include water supply lines, radiator and coolant hoses, air and vacuum hose connections, and low-pressure fluid transfer lines. The adjustable worm gear design allows the same clamp to fit multiple hose sizes within the 0.75-inch to 1.75-inch diameter range, reducing the need to stock multiple fixed-size clamps on a service vehicle or job site.

Key Features

• 201 stainless steel band and housing for corrosion resistance in wet service conditions
• Adjustable clamping range from 0.75 inches to 1.75 inches diameter
• Band width of 9/16 inches distributes clamping load to protect hose walls
• Rated torque of 8.5 Newton-meters supports consistent, repeatable installation
• Worm gear mechanism allows tool-driven tightening with a standard hex or slotted driver
• 68-0 Series construction suitable for use in plumbing, HVAC, and general mechanical assemblies

Compatibility

Designed as a standard worm gear hose clamp for use on hoses with an outside diameter between 0.75 inches and 1.75 inches in plumbing, HVAC, and general mechanical applications.

Installation Notes

Worm gear hose clamps are installed by plumbers, HVAC technicians, and mechanical trades using a flat-blade screwdriver or hex driver. Shut off fluid supply and relieve system pressure before removing or installing any hose clamp. Position the clamp over the hose before seating the hose onto the fitting, then tighten to the rated torque using a calibrated torque driver where precision is required. Do not overtighten beyond the rated torque value, as excess force can cut into the hose wall and compromise the seal.

Technical Specifications

• Series: 68-0 Series
• Minimum Clamp Diameter: 0.75 inches
• Maximum Clamp Diameter: 1.75 inches
• Band Width: 0.5625 inches (9/16 inches)
• Material: 201 Stainless Steel
• Torque Rating: 8.5 Newton-meters

Standard Information

• Brand: IDEAL TRIDON
• Manufacturer Part Number: 6820051