Icp 1176935 Blower Wheel 10x8 in 1/2 in Bore Clockwise

Product Description

The INTERNATIONAL COMFORT PRODUCTS 1176935 is an OEM replacement blower wheel designed for residential gas furnace air handling systems. Measuring 10 inches in diameter and 8 inches in width with a 1/2-inch bore, this clockwise-rotation wheel mounts directly to the blower motor shaft and moves conditioned air through the heat exchanger and into the supply ductwork. Rated as a direct OEM fit, it replicates the original geometry and balance specifications, minimizing vibration and noise at operating speeds. Licensed HVAC technicians and HVAC-R mechanics install this component during scheduled maintenance or corrective service when the original wheel shows signs of imbalance, blade erosion, or hub slippage.

This blower wheel is suited for residential forced-air furnace applications where the original ICP-manufactured wheel has failed or degraded. It is confirmed compatible with the N80VSL, N80ESN, and G80CTL furnace series, among others. Because it matches OEM tooling, blade pitch, and hub diameter, it restores designed airflow volume and static pressure recovery without requiring modifications to the motor mount or scroll housing. Technicians working on multi-zone residential systems or light commercial split systems will find the standard bore and rotation direction align with the original equipment specification.

Key Features

• OEM-matched 10-inch diameter and 8-inch width for direct drop-in replacement
• 1/2-inch bore fits standard HVAC blower motor shaft sizes used in the compatible furnace series
• Clockwise rotation direction matches factory scroll housing design
• OEM blade geometry maintains designed airflow and static pressure recovery
• Direct fit reduces installation time and eliminates field modification

Compatibility

Confirmed compatible with INTERNATIONAL COMFORT PRODUCTS N80VSL, N80ESN, and G80CTL furnace units. Refer to the full model fit list from the manufacturer for additional compatible equipment.

Installation Notes

Installation should be performed by a licensed HVAC technician following local mechanical codes and manufacturer service procedures. Disconnect and lock out all electrical power to the furnace before removing the blower assembly. Verify shaft rotation direction and bore diameter before seating the new wheel on the motor shaft, and confirm the set screw is properly tightened to the shaft flat to prevent hub slippage. Reassemble the blower compartment and confirm airflow direction before restoring power.

Technical Specifications

• Diameter: 10 inches
• Width: 8 inches
• Bore Size: 1/2 inches
• Rotation Direction: Clockwise
• Package Length: 13 inches
• Package Width: 13 inches
• Package Height: 10 inches
• Weight: 6.8 pounds
• Equipment Type: Furnace Parts

Standard Information

• Brand: INTERNATIONAL COMFORT PRODUCTS
• Manufacturer Part Number: 1176935