Hunter Industries PGP00CV Pgp Ultra Shrub Rotor Check Valve

Product Description

The HUNTER INDUSTRIES PGP00CV is a PGP Ultra shrub rotor sprinkler head equipped with an integrated check valve, designed for above-ground shrub-level irrigation applications. The check valve prevents low-head drainage after each irrigation cycle, keeping water from seeping out of heads at the lowest point in the zone when the system shuts off. With a 3/4 inch inlet connection, this rotor is built for residential and light commercial landscape irrigation systems. Licensed irrigation contractors and landscape professionals install this head in shrub and ground-cover zones where a pop-up rotor is not required or desired.

The PGP00CV is suited for shrub-bed installations where the rotor is mounted on a riser above the turf or planting bed. It is commonly used in residential landscape zones, commercial property perimeter beds, and slope plantings where low-head drainage would otherwise cause erosion or water waste. The 3/4 inch inlet allows direct connection to standard schedule-40 or class-200 PVC lateral lines as well as poly pipe with appropriate fittings.

Key Features

• Integrated check valve prevents low-head drainage after zone shutdown
• Shrub rotor configuration for above-ground riser mounting in planting beds
• 3/4 inch inlet connection fits standard PVC and poly irrigation pipe
• Part of the PGP Ultra rotor platform, a widely used gear-drive rotor in landscape irrigation

Compatibility

Designed as a shrub-mount rotor head compatible with standard 3/4 inch threaded irrigation riser and lateral pipe configurations used in residential and commercial landscape irrigation systems.

Installation Notes

Installation is performed by licensed irrigation contractors or qualified landscape irrigation technicians. Shut off the irrigation system water supply and depressurize the lateral line before making any threaded connections. Use appropriate thread sealant tape on all male pipe threads and do not overtighten plastic fittings. Mount the head on a rigid riser at the correct height for the planting bed, and flush the lateral line before final assembly to prevent debris from entering the rotor.

Technical Specifications

• Inlet Size: 3/4 inches
• Check Valve: Integrated
• Head Type: Shrub Rotor
• Weight: 0.4 pounds
• UPC: 10611698157586

Standard Information

• Brand: HUNTER INDUSTRIES
• Manufacturer Part Number: PGP00CV