Hunter 44007515 Sensor Receptacle Tee Sch 40 1.5 in

Product Description

The HUNTER 44007515 is a Schedule 40 sensor receptacle tee fitting designed to house a flow sensor in an irrigation pipeline. Built with slip x slip connections and sized at 1.5 inches, this tee integrates directly into a mainline run to enable real-time flow monitoring. It is compatible with the Hunter Flow-Sync (HFS) sensor system and is used in conjunction with ACC and I-Core controllers to measure actual flow conditions and trigger automatic responses to high or low flow events. Licensed irrigation technicians and commercial landscape contractors install this fitting as part of a flow-management assembly.

This receptacle tee is intended for residential and commercial irrigation systems where flow monitoring and leak detection are required. It is designed for pipe sizes up to 4 inches and is particularly effective when installed alongside a master valve. In that configuration, the system can detect line breaks and isolate water waste automatically, making it a practical component in water-conservation-focused irrigation design. The slip x slip Schedule 40 construction suits standard solvent-weld PVC mainline installations.

Key Features

• Schedule 40 PVC construction with slip x slip connections for solvent-weld installation
• 1.5-inch primary size fits standard mainline PVC pipe
• Accepts Hunter Flow-Sync (HFS) sensor for real-time flow measurement
• Wired sensor connection type for reliable signal transmission to compatible controllers
• Supports automatic high and low flow detection when paired with ACC or I-Core controllers
• Designed for use on pipe sizes up to 4 inches

Compatibility

Designed for use with the Hunter Flow-Sync (HFS) flow sensor. Compatible with Hunter ACC and I-Core irrigation controllers. Intended for installation in PVC Schedule 40 mainline pipe at 1.5 inches. For optimal system function, install with a Hunter master valve to enable automatic flow-fault shutoff.

Installation Notes

Installation should be performed by a licensed irrigation technician or qualified plumber familiar with PVC solvent-weld procedures. Shut off the irrigation mainline and relieve system pressure before cutting into the pipe and installing the tee. Apply PVC primer and solvent cement per the fitting manufacturer and local plumbing code requirements. After installation, verify sensor seating and wiring connections to the controller before returning the system to service.

Technical Specifications

• Primary Size: 1.5 inches
• Connection Type: Slip x Slip
• Schedule: Schedule 40
• Sensor Connection: Wired

Standard Information

• Brand: HUNTER
• Manufacturer Part Number: 44007515