Hubbell Wiring Device-kellems HBL430C7W Pin Sleeve Connector

Product Description

The HUBBELL WIRING DEVICE-KELLEMS HBL430C7W is a 4-pin, 3-pole pin-and-sleeve connector rated for 30 amps at 480 volts AC. Built from impact-resistant, moisture-resistant nylon, it carries an IP67 ingress protection rating, meaning it is dust-tight and rated for temporary immersion. The connector measures 4.27 inches in diameter and 9.05 inches in overall length, and weighs 2 pounds. It is color-coded red per IEC 60309 convention for 480V AC circuits. Licensed electricians and industrial maintenance technicians install this connector on equipment requiring heavy-duty, watertight power connections.

The HBL430C7W is suited for industrial, commercial, and construction-site applications where a reliable, watertight 480V AC pin-and-sleeve connection is required. Typical installations include temporary power distribution, portable equipment hookups, generator connections, and machinery requiring a secure 30-amp locking power interface. The IP67 rating makes it appropriate for outdoor and wet-location use where standard twist-lock connectors would not meet the environmental demands of the installation.

Key Features

• IP67-rated watertight construction for wet and outdoor locations
• Impact-resistant and moisture-resistant nylon body withstands demanding job-site conditions
• 30-amp, 480V AC rating for heavy-duty industrial and commercial power circuits
• 4-pin, 3-pole configuration with red color coding per IEC 60309 480V AC standard
• Compliant with UL 1682, UL 1686C2, CSA C22.2 No. 182.1, IEC 60309-1, and RoHS requirements
• Compact form factor at 4.27 inches diameter and 9.05 inches length for practical panel and equipment fitment

Compatibility

Designed as an IEC 60309-style pin-and-sleeve connector for 30-amp, 480V AC, 3-pole, 4-pin applications; compatible with mating IEC 60309-compliant inlets and connectors of the same pin configuration, amperage, and voltage rating.

Installation Notes

Installation should be performed by a licensed electrician in accordance with the National Electrical Code (NEC) and all applicable local codes. De-energize and lock out the circuit before making or breaking any connections. Verify that the mating inlet or connector shares the same IEC 60309 pin configuration, amperage, and voltage rating before installation. Inspect the sealing surfaces and retaining collar for damage before each use to maintain the IP67 watertight integrity of the connection.