Hubbell Wiring Device-kellems GFRTW82W Gfci Duplex Receptacle

Product Description

The HUBBELL WIRING DEVICE-KELLEMS GFRTW82W is a commercial and hospital grade GFCI duplex receptacle rated at 15 amps and 125 volts, delivering 1875 watts of power capacity. Built with a nylon body and nylon housing, this receptacle is designed for flush mounting in a standard outlet box. It features both tamper-resistant and weather-resistant construction, making it suitable for demanding installation environments where occupant safety and device durability are required. Licensed electricians install this receptacle as part of branch circuit protection in healthcare, commercial, and institutional facilities. The manual reset type keeps control straightforward for service personnel.

This receptacle is intended for indoor flush-mount installations in outlet boxes. Its NEMA 5-15R configuration accepts standard 15-amp, 125-volt plugs. The back and side wiring method supports both quick-connect and screw-terminal field wiring using 14 AWG or 10 AWG wire. The commercial and hospital grade rating makes it appropriate for use in environments where higher durability and stricter safety standards apply, including patient care areas, commercial kitchens, and institutional facilities requiring ground fault protection at the point of use.

Key Features

• Tamper-resistant and weather-resistant construction for enhanced occupant and device protection
• NEMA 5-15R duplex configuration rated 15A at 125 volts and 1875 watts
• Commercial and hospital grade rating for high-demand and healthcare environments
• Nylon body and housing for impact resistance and electrical insulation
• Back and side wiring method accommodates 14 AWG and 10 AWG conductors
• Manual reset type for straightforward fault-circuit restoration
• Flush mount design for standard outlet box installation

Compatibility

Designed as an OEM-style replacement or new-installation GFCI duplex receptacle for standard outlet boxes in commercial and hospital grade applications requiring NEMA 5-15R configuration.

Installation Notes

Installation must be performed by a licensed electrician in accordance with the National Electrical Code (NEC) and any applicable local codes. Always de-energize the circuit at the breaker panel and confirm zero voltage with a meter before beginning any wiring work. Verify that the outlet box is properly grounded before connecting the receptacle. Test the GFCI function using the test and reset buttons after installation is complete and power is restored.